A community of 30,000 US Transcriptionist serving Medical Transcription Industry

Chair recommendations? - anon

Posted: Oct 18, 2012

Can anybody recommend a good chair? I am petite, 5 feet 6 inches but small and need cushioning. I need a chair for an extended day (12-20 hours), preferrably without arms, which seem to get in my way. An affordable one not over $400 if possible and fabric, as it is always hot where I live.

Thanks

Sounds like I am built about the same as you - Gray

[ In Reply To ..]
and I have yet to find a comfortable chair either. I am always throwing on extra pillows and adjusting. I looked into the best chairs and read that maybe a chair isn't what I need after all. Sitting for extended periods shaves years off your life, even if you exercise regularly and don't have other issues. So got creative and for a little money can now stand or sit at my desk, alternating throughout the day. I can walk in place while going back over reports before submitting or even stand on one of those sitting disks (which isn't very comfortable for sitting), which engages core muscles. I am still hoping to find a more comfortable chair for when I am sitting though, so I will be interested in if anyone responds with good suggestions.

RealspaceÃ�Â® PRO Quantum Mesh Mid-Back Task Chair sm - shortMT

[ In Reply To ..]

Hi, I'm only 5'1" and had difficulty finding a chair that lowers enough so my feet can touch the floor and the circulation does not get cut off in my thighs. A co-worker recommended this one, and I love it! It is mesh, not fabric. If you check the site or the manufacturer's site, you may be able to find a fabric one. This has a lumbar support and several adjustments. I removed the arms myself. Love this chair. It is cool in hot weather and comfortable in colder weather. Had it shipped to me since no store in my area. Mid-back is perfect for me.

Thanks for posting that - RC

[ In Reply To ..]
Even 5 feet, here, but with a closet full of heels. :)

Thanks for info but need large cushion.. - anon

[ In Reply To ..]
My buttocks are sore, no padding... I am looking for a chair that I can adjust for petite size and cushioning... I did see a chair called Allseating Presto Mid Back Heavy Duty 24-Hour Use Task chair. through www.sitbetter.com. I hope that works out. Thanks for your recommendations.

I hope the chair you ordered is a comfortable one. sm - shortMT

[ In Reply To ..]
The Quantum Mesh chair I posted has a wide cushion, waterfall, so that it eases the pressure on your legs. I don't know how to describe it, but the seat is some sort of mesh and it is very comfortable and flexible. The height adjust down low enough for short people, unlike a lot of task chairs. I've had it several years now. If anyone else is looking for a comfy chair. Its looks are very deceiving. Very sturdy, heavy chair.

Like I said, I'm 5'1', so even more petite than you. I consider you tall. LOL. Let us know how your new chair is!

Thanks so much! - anon

[ In Reply To ..]
I am comparing this one to the other and will keep you posted. Thanks so very much for your recommendations. I appreciate you taking the time out to help me. This chair I am on now has to go. I am sitting on pure metal it seems..... Also, can you sit on the mesh without having to wear clothes to cover up? This is why I want a fabric chair again. It is hot in my office, and I am tired of wearing long dresses.

chair - anon

[ In Reply To ..]
I ordered the All seating Presto Mid back heavy-duty 24-hour chair 52011 with memory foam and sliding backseat option and will keep you posted.

Thanks so much. If the chair does not suit my purpose, then I will try your recommendation. Again, thanks!

this chair works great for me - anon

[ In Reply To ..]
I'm petite like you and like A LOT of cushioning. Office Depot has a Realspace Caldina chair that I've been using 10+ hour shifts for 5 years. Good cushioning on the rear end. Good back support for me too. The arms come off easy by unscrewing wheels--no screwdriver needed. I work with the arms off. Back adjusts as well as height. It's really been durable for me, and the fabric has held up remarkably well. I've tried more expensive models, leather, mesh and more ergonomic, but honestly this is the most comfy for me. It's a good deal at about 150 bucks. Priced like lower quality, but as the padding is getting a bit flat on this one, I'd get a new one in a heartbeat.

Similar Messages:

Feb 05, 2011

The cushion is completely flattened from my big rear end, and now I can't sit for more than a hour without the numb-butt feeling. I'm looking for a good chair but, of course, I'm on an MT salary, so I can't pay top dollar. I'm thinking about $150 or so. Any ideas? ...

Aug 16, 2010

I'm looking for a good transcription chair. When we started working from home I asked to take my chair and told I could not. I even offered to buy it from them but still could not get it. I want one that adjusts in height and has arms that move in or out as well as up and down. The chair at the hospital was over a $400.00 chair and it was so comfortable. If anyone knows of a good place to purchase one of these over the internet please let me know. &nbs ...

Dec 09, 2010

1410 lines for $87. I can really hook up my family with the Christmas presents on that. Bah Humbug. ...

Jan 31, 2011

The patient is sitting in a "cherry" chair? I have never heard of this type of chair, can anyone verify if "cherry chair" is correct? Thanks! ...

Nov 10, 2011

Good morning, Wound care physician states "The patient was brought in by portable S/L CHERRY chair, was driven down by the driver, not a trained medical attendant" Cant document the CHERRY part. Not sure if it is a slang term, brand name or what. Thank you in advance. Hope everyone is staying busy! ...

May 16, 2014

Does anyone have some suggestions for a good quality office chair, an ergonomic model in particular which focuses on support for the lower back? I've been able to get away with relatively cheap ones for over a decade, but after a back injury last year, the cheap ones are killing me. I've tried back rests and cushions with no relief. I've looked at some floor models in supply stores and online reviews, but can't tell which one would make a difference. I'd apprecia ...

Feb 24, 2010

I wanted to share my chair info with every MT. I recently read about the Body Built Chair and decided to check it out. I did finally purchase the chair after much hesitation because it cost so much. I love the chair so much! I am so pleased I purchased it. They do have a 30 day return policy. I was having pain and discomfort in my lower back, my legs, my butt, every where it seems after years of transcribing. I have purchased several chairs. ...

Mar 24, 2011

I'm trying to use just my balance ball right now. I have some low back problems and find that my posture is horrendous with sitting in a normal office chair; however, just the balance ball alone seems to be a little too low. Overall, it feels more comfortable on my rear end than my normal office chair and I'm definitely sitting up straighter, but wondered if anyone else out there had any experiences, good or bad, with using a balance ball or the balance ball chair setup.&nb ...

Apr 27, 2011

My computer chair tore up, so I needed to get a new one. I tried some out at the store and got a cushy one. After I put it together and sat in it for 30 minutes, I had severe pain. It felt like my whole body went numb and tingly. So I had to take it back. I got a second chair and can tell it's not going to be comfortable and that I will need to take it back. I'm sick, tired, and frustrated about this. Not at the stores or the people that work there, because it's not their fault ( ...

Nov 05, 2012

I am looking for an ergonimic chair/saddle stool with a back or arms to buy. They are very pricey new, but I thought to see if anyone has one that just did not work out for them here. If you have one and can send me pictures and my basic deal is I am very short and need one that the seat will adjust pretty low/ ie in the neighborhood of 16 inch height I would like to hear from you. Thanks ...

Dec 19, 2014

This is their "official" statement I found about their wonderful platform and the ability of MTs to increase their compensation up to 100%!!! Wow!!! Spitting my coke all over the computer screen http://www.nuance.com/for-healthcare/resources/mt-compensation/index.htm ...

Sep 01, 2010

Does this aggravate anyone else? I tried gathering the slack and tieing it but then the shorter line is aggravating, too. Just wanted to vent. ...

Jul 16, 2013

Can anyone recommend a good small company that will pay a decent line rate, not make me learn a new platform and treat me with respect? Any help would be greatly appreciated. ...

Apr 11, 2011

I went to a seminar for At-Home Professions. The training course is about 5 months. I am trying to decide if I finish the courses, will there be employment opportunities? ...

Apr 12, 2011

I need a new headset for my PC. I want want with really good sound -- but want don't want to spend lotsa $$ -- anyone got any suggestions for a good sound quality headset that is affordable.. thx.... ...

Jan 29, 2012

Hi, Folks, So, my company sweetly sent me a dictaphone stethascope-style headset, but it's really uncomfortable for me. Can you recommend a more comfortable, good-sounding headset that you might have found? Thank you, thank you, thank you! ...

Apr 23, 2012

I don't know too much about KVM switches, but I am getting ready to start two new jobs and have two different computers. I thought I might try one. Today, my foot pedal for my second job came in and low and behold, it is the same one for my first job. Do any of you know if there is a KVM that will switch keyboard, video, monitor, headphones, AND foot pedal, and can you recommend one to me. I'm trying to research, but all this techie jargon makes my head hurt an ...

Jan 11, 2013

I need to get a new headset as mine is wearing out. I haven't ever bought a headset before and just used the ones that came with my transcribers as they worked fine on the computer as well. I tried the stethescope type and didn't like them but otherwise would like some thoughts on what might be good ones to try. Thanks! ...

Jun 30, 2013

I'm looking for just a basic expander program that works similar to Word auto correct. I've found two that seem to work very much like the one I'm used to, and similar to auto correct. One is FastFox by NCH (affordable) and the other is Speed Type (expensive, but may be worth it??). Does anyone use either of these? Suggestions appreciated. Thanks! ...

Feb 21, 2014

Any recommendations for a good keyboard? ...

Feb 23, 2014

For best audio quality? TIA ...

Jun 20, 2014

Hubby and step child will be home for the next 9 days making my work environment extremely noising and crazy. I need to get new headphones and wondered what everyone recommended. I can't stand the kind that sit in the ear. Every pair I have every tried makes my ear hurt after about 2 to 3 hours and as I am on a 12-hour schedule I prefer over the ear ones if any uses them. Thanks in advance for all your recommendations. ...

Oct 27, 2014

Pros/cons ? Any experience with Career Step, Andrews, etc? TIA ...

May 16, 2010

Would like recommendations for best text expanding for transcription. Thank you for your help. ...

Jun 23, 2011

I'm one of many MTs who are considering coding. I want to do acute care coding, or hospital/surgical. I've spoke with Allied, AAPC, and both sound reasonable for CPC-H certification. Does anyone have any experiences with either or other schools/courses they will share? ...

Oct 02, 2010

I have been an MT now for 10 years. My fingers and hands hurt horribly. I went yesterday and had nerve conduction studies done and I do NOT have carpal tunnel. The pain is just in my fingers. The doc says it is arthritis. I use the Microscoft Elite ergo keyboard which the doc believes kept me from getting carpal tunnel but I am looking for a soft touch keyboard and want to keep the split keys like what I have. Can anyone recommend a keyboard? I have tried typematrix and cannot use that. Also Kin ...

Jun 14, 2011

Does anyone have any website suggestions for where to find the name of a drug that would be marketed outside of the U.S., specifically Europe? I've tried drugs.com and spelled it as many ways as I could think on google, but am not having any luck. Was wondering if maybe there is a website specific to European meds? Thanks in advance for any help! ...

Jan 06, 2012

(I'm sorry--this posted on the main board somehow...which is really strange as I almost never ever visit the main board...but oh well. Here is it again on the correct board.) I have been a transcriptionist for about 11 years. Was an employee for about 8 of those years and IC for 3 years during that 11-year period. I truly enjoy IC work more than employee status. I just enjoy the flexibility. My life is such that I no longer need to work full time, but I DO nee ...

Sep 26, 2012

Am considering a position and have completed the testing process. Seems there are always after-the-fact issues that people wish they would have known to address before jumping on board. Would like to get some ideas beforehand if possible. Thanks in advance for any insight you can share. ...

Dec 14, 2012

with their job? I know there are tons of people asking for information on companies all the time on this board, but every company I search on looking for information on here, either the information is a few years old or not the information I'm necessarily interested in. I'd appreciate any input, good or bad, I can get. I have 18 years experience and have done just about everything except radiology, so the type of account doesn't matter, though I love ortho an ...