A community of 30,000 US Transcriptionist serving Medical Transcription Industry


easy assemble 24 dot matrix printer - waxy


Posted: Jan 20, 2011

Does anyone know if there is an easy to assemble 24 dot matrix printer?

What's to assemble. I though you just plugged - them in. nm

[ In Reply To ..]
x

assembling the ribbon - waxy

[ In Reply To ..]
assembling the ribbon on an Epson LQ 590 printer

Ok, I am in over my head. Sorry. - nm Plug-in lady.

[ In Reply To ..]
x


Similar Messages:


Doctor Going From Tapes To Wave Files--what Software Is Easy To Install, Easy To Use And Inexpensive
Apr 29, 2010

Do I have to buy the dictation equipment or the doctor?  Can I use the software with moer than one client?  We are moving and this is key to keeping my job.  Any advice would be helpful.  Thanks so much in advance for all help! ...


Anyone Heard Of *EVO III" Or Close To That, Demineralized Bone Matrix?
Oct 20, 2009

nm ...


Printer Problem
Jul 15, 2010

I have a Canon MP240 printer that ran out of black ink.  I replaced the cartrige and the printer will not recognize that there is ink in it.  This has never happened before  Does anyone have any suggestions?  Thanks! Shelly ...


Weird Printer
Jun 23, 2012

I just sent a document to my Hewlett Packard printer and set it for 3 copies.  The first copy was fine.  The second and third copies looked like a new language.  On further inspection, it was obvious that each letter of the alphabet and number was offset by one.  In other words, a became b, b became c, 1 became 2, etc.  When I sent a request to print just one more copy at a time, it printed just fine.  This is undoubtedly the strangest thing that I've ever had ...


The Print On Printer Just Too Small
Jan 25, 2010

Have XP Dell and use Word Office to type up letters and such. No matter how large the print is on the screen of my monitor, when I print it off it is so minute you can hardly see. I have no idea how to set the printer to have larger print. Can anyone give me some assistance? TIA ...


Question: If You Need A Fax Machine Or Printer For A Job...
Oct 14, 2014

Does that suggest you will need daily patient lists faxed to you that are hard to read and you have to stop and glean information from them that you are not being paid to do? Just wondering.  I just assumed all of that from the need of a fax machine.  Anyone else venture a guess?      ...


Laptop Doesn't Recognize Printer - SM
Mar 22, 2010

I have a Dell Insprion 1525 and  HP Laserjet 1020.  The HP is not listed in the Dell's list of printers to connect to.  I can't find the disk that came with the printer or the instruction booklet.  Does anyone know of a way I can get the printer to work with the laptop through some other means?  I don't know much about all this stuff so any info would be greatly appreciated.  Thank you! ...


Windows XP/printer (non-MT) Tech Question
Jan 27, 2013

Okay, I admit it, I'm being lazy posting here, because it's just a computer tech question, not an MT-equipment-related one.  However, I hang out here and know there are some pretty tech-savvy folks, so I figured it was worth tossing it out there. I have an HP4 LaserJet printer (an OLD workhorse -- we're talking a 20-year-old printer and still going strong) and recently bought a new PC running Windows XP.  The LaserJet is a parallel printer, and the new PC doesn� ...


Laminectomy L2-L5 With S/l "inductofil" Bone Matrix
Jun 07, 2010

Any Ideas greatly appreciated... ...


Probably An Easy One, I'm New At This.
Jun 18, 2010

FINDINGS PA and lateral views. Comparison exam 4/30/07. The lungs appear clear. Cardiomediastinal silhouette is within normal limits. IMPRESSION Unremarkable chest. <???> changes from 4/30/07 exam.   I was thinking it sounded like "No speculative changes" but it's very blurred and sort of sounds like "noticed the beginning of changes" but that doesn't make much sense. I just can NOT make out what the dictator is saying! A more experienced MT will probabl ...


Here's How Easy It Is
Mar 14, 2012

Make a sign - use cardboard, paint, real easy.  It will say  "OCCUPY M*MODAL" or "OCCUPY ACCENTUS" (I just pull names out of a hat).  Then list one or two of the most egregious abuses on the sign.  Extra points for humor or good zingers. Go stand somewhere in public.  Maybe connect up with Occupiers in your area.  Just stand there with your sign.  Have a friend take a pic,and post it online.  Maybe stand outside a local hospital or other health care clini ...


Bayscribe Is Easy To Use?
Feb 17, 2011

I just found out that the company I work for is going to start using Bayscribe next week. I never heard of it untill now.  I currently use Word with my own word expander. Does any one know if it is productive and easy to use? ...


Easy Bike?
Feb 15, 2012

The patient is recovering from a broken hip.  She is supposed to use her Easy Bike?  Is that correct spelling or is it something else?  Thanks. ...


What Is An Easy Way To Tell The Difference Between These Two?
Mar 23, 2012

Procyte and Prosight I know that Prosight is a multivitamin.  I found both on WebMD's drugs and meds A-Z.  There was no information on Procyte.  It was just listed as Procyte Top.  I was not aware that there was a Procyte until earlier today.  The doctor dictated "And be careful you use the correct one, but I am unsure of the spelling."  That confused me a bit, so I did some research and the only place that I found any mention of Procyte was on WebMD.  An ...


"e-say" Of The Dermal Matrix
Jun 15, 2014

Mastectomies, now is completing final phase of breast reconstruction after having had tissue expanders in place.  He says s/l "e-say" of the dermal matrix was incised or the "e-say" of the dermal matrix was up against the expander.  He is very good dictator, so is frustrating to me not to figure this out.  Perhaps an acronym?  Thanks!  ...


Is Webmedex Platform Easy To Use?
Jan 16, 2010

Do you have to go to a lot of screens to enter demographic data?  Is there a lot of downtime?  Is the VR program fairly decent or are they putting every dictator on it and then the MLS has to straighten it out.     ...


How To Look Like An Idiot In 3 Easy Steps
Feb 21, 2010

I made my resume approximately 7 years ago.  Since that time, when searching for new employment opportunities, I have added recent experience, PC upgrades, new software, new training, etc, to my resume and sent it out updated with what currently applies.  In the past 10 days, I have sent my resume to approximately 50 companies in my newest search for work.  In the past 7 years, I have sent my resume to probably 200 potential employers. Today, for the first time, I received a re ...


Ortho - Easy To Learn?
Mar 17, 2010

Hello!  I have been contacted to do some ortho backup which I have never done.  Just wondering how difficult this is to learn.  They tell me all docs are pretty good dictators.  TIA. ...


It's Pretty Easy To See One Of The Problems With
Jul 13, 2010

...and probably those of some other companies as well.  Transcend supervisors are expected to oversee teams of up to 35 MTs, keep the account in TAT, mentor their people to improve their performance, ride herd on "mavericks", monitor the account status and do all of the other typical supervisory chores.... ....while transcribing 75 to 80% of the time.  ....in exchange for which they are paid a stipend of $700 a month. Now, there is so much wrong with this picture that I won't b ...


Easy Workup Reading?
Jun 24, 2011

"Chest:  Clear to auscultation bilaterally with s/l an easy workup reading.  He had equal breath sounds heard throughout." I don't know what "easy workup reading" actually is. ...


There Is No Easy Way In Word To Cap After Colon Is There?
Dec 05, 2014

a word expander like Speed Type would do that?  And can you use Speed Type along with MS Word?  And transfer over all your AutoCorrect entries easily?  I emailed the company but haven't heard from them.  : ( ...


Coding Credentials Made Easy!
Jan 12, 2012

People who are new to coding get confused about credentials. There is some great information in the pages below if you read what has been written on here for months, and I definitely recommend doing that. You will learn more than you can imagine.  I thought I would try to put it in a short,  easy-to-understand format, specifically designed for MTs who are transitoning to coding. CCS and CPC - Impressive! Marketable skills. This is comparable to a medical transcriptionist who can type ...


Easy High-Paying Jobs
Mar 10, 2012

Not saying anyone would ever possibly want to get OUT of MT, but if there should be some lunatics on the board who are thinking this way, well...     ...


Escription - Is This An Easy Program To Learn?
Aug 20, 2013

Is this an easy program to learn? I have applied for a few posiions and was wondering about it. ...


Is ByteScribe An Easy Platform To Learn?
Sep 29, 2014

d ...


TTS Good Dictators, Easy Platform, Etc.?
Feb 07, 2015

Two questions please: Does anyone working on the new oncology account and if so, how is it? Good dictators, easy platform, etc.? Secondly, is it just me or does TTS have more paperwork for a new hire than I have ever seen in my life? I've surpassed 75 pages at this point and the emails are still coming!! I've never worked for an MTSO that does this. ...


EScription - Good, Bad, Easy, Difficult, Frustrating
Nov 14, 2011

How is the eScription software - good, bad, easy, difficult, frustrating, blah, blah ...


Is Meditech Hard To Learn And Easy To Make $$?
Aug 02, 2012

Thinking of applying to KS.  The position I would apply for uses Meditech.  I have only used Escription, so how do these compare?  Thanks !! ...


I Will Be Starting Soon For A Company That Uses The Emdat Platform, Is This Easy To Learn, Etc.? Sm
Oct 16, 2014

I have never worked for a company that uses a platform before, always an FTP site and word, so this is new to me.  Is it hard to learn, easy to count line count, etc.?? I am bringing up old messages here that say nothing but negative about it and I'm starting to get nervous, but those were from 2008 or so, so maybe it's better now??  ...


"easy Mask" Anesthesia. Need Correct Spelling. Sm
Oct 08, 2011

The patient was put to sleep using "easy mask."  Can anyone tell me if this is a brand name, and if so how is it spelled?  I can't find it in my references nor by googling.  Thanks! ...