Maybe we could split into two MM boards

I am just finishing up my medical transcription course and was wondering if anyone knew if it is helpful to use the job seeker's board/resume bank on this site? Has anyone ever gotten any responses from it? Thanks. ...

How to easily link to boards here, since links don't "click" unless one does the following. Go to the site you want to link. Highlight it as if you were "copying" it. Paste into Link field here below your note. You subject line will come up in that link and we can all click it. ...

Sometimes I think we need two Nuance boards. One for everyone who is disgruntled and need a place to vent, and another for those of us who are trying to keep a positive outlook can find some encouragement. The "Gooooood Morning" post a few days ago made me think about that. It would be good to interact with our fellow Nuance coworkers, but after visiting the board, I am usually upset and rattled by all the negativity...... ...

Hi I was just wondering if there are any boards with coding jobs listed on here? I just thought that maybe there is somewhere since they have this coding/billing forum? Any ideas?? Thanks ...

Nothing shows up. ...

I've found a few but they all have very old posts of them. I alraedy know about the AAPC boards of course. Thank you. ...

As much as we all like for things to go back the way they were before VR, before offshoring, before the EMR, that is unlikely to happen. I come from an era of transcription where we actually could support ourselves on being a medical transcriptionist. Unfortunately, that is not the case with transcription any longer. I work for three different companies and there isn't a dime's worth of diference in any of them low pay, long hours, supervisors that are not MTs that ar ...

for a while know you must be "that guy" whose responsibility it is to come here and do damage control. Whenever something big happens in a company or an MT gets a raw deal, there is always someone who attaches themselves to a thread to blame the MT - obviously their quality sucked or clearly they didn't show up for work or everyone else is getting laid off so why not you. Here's the thing - we see you a mile away. The fact that you randomly decided to show up on the boards ...

Messages are appearing on the main board for word help, questions about companies, and those looking for jobs. Messages are posted on the Job Seeker's board for questions about companies. Is there that many new people on this board that haven't read the guidelines or checked the different boards out before posting or is everyone just in a hurry and decide to post wherever or whatever board they are on? Sorry, people, but I'm in a bad mood today and when I go to t ...

Can anyone tell me where i can find info on how to do a split job in DQS. Thank you so much ...

I did the first job, put the cursor at the end, and split. I have an empty ADT screen but the first report is still on the screen. Am I supposed to put in the new ADT information and then just manually delete the first report? It's a VR report. ...

tried two times and finally did job audit and saw it there. So went ahead and deleted it from new report. HOWEVER, got line credit for it three times, now concerned that the customer will say something about getting 3 copies and wondering if they will think I was trying to steal lines? Thinking maybe I should email CCM? ...

The original company I worked for was sold to a big company and I had loads of unanswered questions. I would call supervisor or someone who had been in contact with the peeps from my old company and ask away. Now I find out I have been labeled a troublemaker because I ask too many questions. I guess I would have been wiser to just come on this board and fire away with complaints, questions or anything else I wanted to know. I know my future is gone now where I am. &n ...

Ortho, arthrotomy/knee arthroscopy. "Anterior midline skin incision was made, full-thickness skin flaps mobilized, and a medial arthrotomy performed, extended proximally...to the trivector split...OR...with a trivector split? Also, I cannot find "trivector split" anywhere. I can find "trivector retaining approach" in Stedman's, but have never heard of trivector. TIA! ...

I had to listen to the new Split job instructions again because it had been so long since the tutorial and I had forgotten. I didn't say it was "hard," but it had changed, and I had to refresh. I don't throw jobs back, so had to go to MQ Central and find the tutorial again and listen about the "import" function and how to do it since you don't highlight and hide the text anymore. It did take probably 15 minutes to find it and listen through the whole thing becaus ...

Hi folks, I think I'm losing my mind. I just did a split job, which I did...split it I mean, and it went over with words typed. When I checked to make sure all was okay, no words on the paper. But, the next report I did of the split was correct. What am I doing wrong? Thanks. ...

I have been using OLD system with Windows 2000 and Outlook express to run the Digital Dictate and Express Delegate. It is finally starting to give me issues. I was looking into jsut upgrading to a new platform, BUT with all the cloud type places out there, the idea of not having to deal with equipment at all is quite intriguing. Who is using something beside Dial Dictate and Express Delegate to get their dictations and send to any MTs working with them? Thanks Maggie ...

If you work split shifts, does it feel like you're working all day? Or do you find it works for you? TIA ...

If you were told by an employer on a given day you could work a split shift, what would you consider a reasonable amount of time in that split frame? 1 hour, 4 hours? I just took a new job and am being screwed. Would just like your opinions and have some validation for my own satisfaction as to who is being unreasonable. Thanks. ...

Looking to buy a new keyboard (or used in decent shape). Which ones are both durable and affordable? I see so many that I don't know which would be the best one. Currently looking on Amazon and there are several. TIA ...

you work straight through. Thinking of going FT but not sure if I want to split my hours up or work straight through. Thanks for any help. ...

I can't believe I have not had a split job since new changes to DQS, but today I have a split job. I did what I thought was the correct way and had cursor where it should be. Asked for split, then yes, and oh my heavens. I cannot get anything of the other original to pull up and NO ADT info will even load. Sorry I had to break this, and I have sent a message to my QA Sup to help this very old dog. Does anyone else get totally confused on how they changed ...

What shift do you work? Are you hours flexible? I've been offered a couple shifts but I'm not sure how they'll work out with my family life...any experience you all might have with this or suggestions would be great! Thx! ...

Anyone else having this problem? ...

Hi Everyone, Let me introduce myself, my name is Danna Rayton and I am a disabled veteran. I am currently a student at Kaplan University Online for Medical Transcription. I am writing you all due to a blog I read about a person wanting more information for her friend with spina bifida. I know with having a foot injury from the military I will be have a hard time using the foot pedal myself. TranscriptionGear has a software program that will allow me to program hot keys an ...

up during the day - working 2-3 hours at a time - or do you work a straight 8 hours with breaks and a lunch? Thinking of going full-time and just cannot sit at my desk for 8 straight hours. I'd rather split my hours up but this then makes for a very long work day. Just wondering how others set their hours/schedules. Thanks for any information! ...

Maybe we could split into two MM boards - One MT/One Coder

I agree tired of all the coding talk. I think the coding talk should be moved - to coding board

Agree. There is also one poster who keeps - posting his/her impression

I don't think I have seen any MModal - coders even comment on either board

Maybe M*M has told them to keep their mouths shut. - Stranger things have happened... (N_M)

Maybe they have a more positive outlet to exchange ideas? - This place can be really vicious.

Like Rip Van Winkle, - I have returned to find

Similar Messages: