A community of 30,000 US Transcriptionist serving Medical Transcription Industry


Editscript 9.12 and SpeedType 10.01b - Bewildered


Posted: May 17, 2012

 I am working on EditScript 9.12 and SpeedType 10.01b on my PC with Windows XP Pro and Word 2007 with very few problems.   I bought a new computer which uses Windows 7 and Word 2003 and cannot get SpeedType to work on the new machine.  I have talked to SpeedType and they say it is the Editscript platform causing the problems because SpeedType works in Word, wordpad, email, everything except Editscript.  Is anyone out there using Windows 7, Word 2003 and EditScript 9.12.  If so, I need your help!!!!

You can use Instant Text with - EditScript

[ In Reply To ..]

and  import your Speedtype list to be up and running right away.



Similar Messages:


SpeedType Question
Jun 01, 2010

Hi All.   I have an opportunity to purchase SpeedType and have been reading about it some.  Currently I use just the expander or Autocorrect that comes with Word to make little handy helpful hints for words I use lots.  Can anyone tell me the advantages of Speedtype versus what comes with Word, pros and cons, etc..   Thanks ...


SH10 And Speedtype 10
Sep 22, 2011

I have used   shorthand (various editions for years).  I had problems with it on my new computer and switched over to Speedtype 10.  I had trouble getting SP10 to accept the files I switched from Shorthand.  Now, shorthand is acting like a child.  When I close it out, I get a message that says ST10 .exe not functioning and it freezes my computer.  The same goes for Speedtype.  Has anyone else had this problem?  It started on both all of a sudden and t ...


SpeedType Question?
Oct 03, 2012

I just installed SpeedType & I am FRUSTRATED!  Could someone pleeeeease give me the specific steps to copy a block of text that you have just typed into the SpeedType dictionary?  I work for a company that promised 90% editing, 10% transcription, but so far it has been 100% transcription, and there are no templates for the big 4!  And since we're not supposed to cut & paste anymore, I got SpeedType so I could make my own templates, ONLY I CAN'T MAKE IT WORK!!!&nb ...


Speedtype Vs Smartype
Oct 16, 2013

Since the old Smartype does not support Windows 7 or 8, only XP, I bought the new (not Stedman's anymore) Smartype.  It is not very good at all.  I contacted Speedtype, which looked really great, similiar to the old Smartype (I can macro large blocks of text for OP reports) and spoke with the CEO!!! REALLY?? She was fabulous and told me there was a shortcut to get your old blocks of text into Speedtype without cutting and pasting.  I have not tried the 15 day trial period yet ...


Instant Text Or SpeedType?
Mar 16, 2010

I just got a new computer, Windows 7 64-bit and my SmartType does not work.  I need a new program and I was looking at Instant Text and SpeedType.  Does anybody have those and which one is better????  Appreciate any help you can give me. Thanks!! Lori ...


Shorthand Versus Speedtype
Sep 06, 2013

I'm trying to decide on an expander and already eliminated IT as beyond my capabilities.  I'm looking now at SH or ST. Can anyone explain to me what differences there are between these 2 programs?  I'm flipping back and forth between the 2 websites and am I missing something or are they essentially the exact same program but one is less expensive? Also, can anyone tell me if either or both of these programs allow identical names for abbreviations or do they require dis ...


Can SpeedType Be Used In EMDAT Platform?
Jul 31, 2014

I am thinking about taking a position using an EMDAT platform.  This is not a big company, just a nice woman who works from home and employs a number of transcriptionists.  I have never worked in a platform, so really have no clue what this entails.  My biggest concern is being able to use SpeedType, as I have thousands of entries and rely on it heavily to do my work.  The thought of using another word expander, building a dictionary, etc., does not thrill me.   The ...


Editscript - How To Check My Line Count In Editscript? 
May 18, 2013

Can anybody tell me how to check my line count in Editscript?  ...


License For Speedtype Was No Longer Valid
Feb 23, 2013

I am currently an Exact-Med student.  They give each student Speedtype.  I had been using it, but my husband updated our Soundcard and then it said that my license for Speedtype was no longer valid.  So I had to purchased a new llicense for a "new computer" since by updating the sound card it changed settings on our hard disk.  Then we went on vacation and turned our computer off for 2 weeks and when I restarted it, it says my license is not good anymore....don't know why, but apparentl ...


Any Difference In EditScript MT 9 And EditScript MT 9.12?
Dec 29, 2011

Does anyone know if there is any difference in EditScript MT 9 and EditScript MT 9.12?  If there is, how can we update this? It seems that my new place of employments line counting is not the same as my old place of employment.  New employer has EditScript 9, while my old work had EditScript 9.12, and my line count was much more at my previous employer.  Now it seems I can put out tons of work and see not much for lines...  Very frustrating. When questioning my employer now, they say t ...


How To Add "-year-old" Entry To SpeedType?
Jan 29, 2011

Can someone please tell me how to add "-year-old" entry to SpeedType? New to this program. Thanks! ...


New To EditScript
Jan 26, 2010

Hi All.... I was just hired by an MT company that uses EditScript. This is a brand new experience for me as my previous MT job did not use this platform.  I've been studying the user manual and specs, but am nervous about starting tonight.  I'll be starting out with 10 reports.  I know it will be "SLOW GOING" especially tonight. I want to do a good job, but worry about being too slow at first. Any words of advice or encouragement out there???  I could use some ...


Going To Editscript VR
Feb 12, 2010

I am going to be going to ES VR.  I have been working on Dictaphone Extext straight typing and a little VR.  I did not find VR in Dictaphone to be good.  I have done ES before, and I believe it is better.  Considering the chump change we make to do VR, do you think you are paid enough to proof your work after you have edited the report, or do you do a once over and go on to the next one?  I mean, really, with what we make, we really have to do a once over to make anythi ...


EditScript And TTS
Jun 19, 2011

Offered a job with this company on EditScript platform. I still have job with major company.  Should I make the switch.  Pay is the same but run out of work a lot where I am now. ...


IE 10 For EditScript?
Mar 24, 2013

Can we use IE 10? ...


EditScript ?
May 25, 2013

Just wondering what people think about the platform EditScript.. would love to hear opinions, pros and cons.  Is it easy to learn? Thanks.  ...


Can Anyone Help? In EditScript, How To You Get That
Dec 11, 2014

little icon you can click on to "hear silence parts of dictation rapidly" back?   TIA ...


New To VR/EditScript/Escription
Oct 25, 2009

After 40 years on the job and getting tired of typing, when out of a job this last time (there have been so many times of late because of ...well most of you already know how goes it with our profession), I decided to just go for what seems to be taking over transcription anyway.  Thanks to this board and all the talk about the different platforms, I took a job with a company that uses EditScript, and I am thrilled.  In those 40 years, I have had to do a lot of proofreading as a super ...


Editscript And USB Footpedal
Nov 18, 2009

I have a VEC USB port. I cannot seem to get it to work in EditScript. I also have Express Scribe. Is there a way to get the foot pedal to work. Checked Belkin instructions, and there is no foot pedal listed in my ports. BTW, don't have Belkin so wont work anyway. Any help would be appreciated. ...


Escription/editscript/qc
Nov 22, 2009

I posted this on the company board but this might be a better place...I work at FocusInfomatics...QC..just started not that long ago.  Many years of experience with editing, QA, MT, etc.  I'm new to VR. I would love to hear what to expect for production as right now...it's not so good.  I understand variables, etc.  My work load is very low right now but that is supposedly going to change soon.  With QCing everything to sound, can someone tell me what they ...


Looking At Old Reports In EditScript
Nov 27, 2009

I recently upgraded to EditscriptMT 8 from verson 6 and now find I cannot look back at old records as I used to do and check for familiar phrases, medication lists or other information.  Does anyone know how to look back at previously transcribed/edited patient records in EditscriptMT verson 8?  Thank you in advance. ...


Has Anyone Else Worked On Editscript
Nov 27, 2009

Has anyone else worked on Editscript and what do you think of it? ...


Anything Good Or Bad About Editscript?
Jan 26, 2010

Does anyone know anything good or bad about Editscript?  Do you know if it works on Windows 7? ...


Which Companies Are Currently Using EditScript?
Feb 13, 2010

Which companies are currently using EditScript? ...


Escription/Editscript
Feb 24, 2010

I am starting a new job that uses Escription and Editscript.  I use Shorthand as an expander and Spellex as my medical dictionary.  Does anyone know if these will function correctly in those programs? Thanks! ...


Shorthand With Editscript
Mar 01, 2010

I know that if you use Autocorrect, your information needs to be transferred over into Editscript.  If you use Shorthand instead, how do you go about getting THAT information transferred over into Editscript?  Thanks!!!  ...


EditScript And Shorthand
Mar 01, 2010

How do you import Shorthand entries into EditScript?  Thanks!!! ...


Editscript VR Only 50% Accurate
Mar 05, 2010

So you get a report where the text has been typed by a computer. Then you must edit it. My sources (a large regional hospital MT Dept) tells me that the computer generated text is only 50% accurate, a far cry from what the vendors will tell the dupes at the hospitals who are buying into this junk. ...


Do All Companies Who Use EditScript Pay 4 Cpl For VR
Mar 05, 2010

nm ...


What Versions Of Editscript Are There?
May 10, 2010

Can someone enlighten me on Ediscript(Escription).  What is Editscript 8.0 and the older version.  Can someone give me some general information regarding Editscript and what is the newest version and the oldest version,etc--thanks ...