Creating a jump macro on Radnet

Can anyone help me set up a jump code in Word 2010? I knew how to do it in my Word 2003 but having trouble with the new version. I know its gotta be something simple I'm missing. I'm sooooooo frustrated! ...

Can anyone tell me how to create a jump code in Word 2010? I downloaded the instructions for Word 2008 from this site and I can't get it to work. I normally have my jump macro as ALT-J which is supposed to jump to * and then delete it. Would be eternally grateful if you can help me with this. Hittin 30+ years in transcription . . . wish I could afford to retire!! :( Thanks again!!! ...

Does anyone at all use Radnet for radiology transcription? We can't see our line counts at all. It's "done by the supervisors" for us. And don't try pasting into Word for the line count because it's "calculated differently". There must be a way to see what they're doing? ...

Does anyone know if Shorthand works with the radiology MT program called RADNET? I have used Shorthand for over 12 years and it is my life-line and want to keep it if I take this other account with RADNET. Thanks! ...

Are there any RadNet users that know how to create a table in RadNet? Is it possible? I know how to create templates, but am stumped. I know tabbing is not an option; but, occasionally one of my physicians would like me to create a table and have been unsuccessful thus far. Thanks! ...

When we are in a report that requires a blank, and the report is corrected/changed by another MT in Cerner Radnet, is the line count from that report given to the MT who corrects/changes the report? In radiology, the long reports are the ones which tend to require some investigation or confirmation by physician, and of course, the long reports give us the lines. Is it true that we are essentially handing our lines to the MT fortunate enough to find our job in their queue for minor co ...

Hi, Can anyone tell me how to create normals in Meditech? I am trying to set up my normals for all the headings for each particular doctor so they will already be bolded. It is time consuming bolding the headings. Trying to figure out ways to be proficient, as my line minimum went up. Any help would be appreciated. Thanks ...

I am attemtping to create shortcuts for routinely used text (HPI - history of present illness...) in Fusion (Synernet), but the reference guide and card are not helpful. Can anyone please tell me (simply please!) how to create canned text in this program/platform? ...

I know this is probably pretty basic for most people but I just started using MS Word for one of my new MT jobs and there are a lot of repetitive phrases, salutations etc and I want to create my own macros and Autotext but can't seem to find some definitive answers on the internet. I have been working for over 20 years for a hospital who provided all the up to date auto text and macros so I didn't have to create them so now I'm lost. Thanks for any help or advice. ...

Can anyone give me tips on creating an online resume? My first impression is important for this since I can't be there in person...Any help would be appreciated. I am retired from my career, but took a course in medical billing and medical transcription so I could work from home in a rural area. I have limited MT experience (1 year at a large company) but want to expand my workload a bit. Help! ...

Saw an ad on another site this morning. Acute care, all kinds of this and that you need. For the marvelous cpl of, wait for it, 5 to 6 cents!!! Don't everyone pile on at one, now! ...

does anyone know how to set up a jump key? ...

Can anyone help me with making a jump code in Word 2010? I am so frustrated and can't find any info on what I need. I use shorthand and I need to be able to create a "macro" that will allow me to press Ctl +J to jump to the ??'s in my documents. For example, the patient is a ??-year-old ??male. I want to be able to jump to those question marks with a keyboard command. Noone seems to know how to do this. HELP!! ...

Hello! Do any of you use jump keys? For example, I have asterisks (*) in all of my templates in places where I need to insert something (vitals, he/she, etc.).. I made a macro that says anytime I use a quick key (for me it was Alt+x), it would jump to the next asterisk and I could quickly type whatever needed to go in that spot. I recently had some new software put on my computer and it completely took out that macro. This is bad because these jump keys are a HUGE timesaver! Unfortun ...

My "jump code" macro has disappeared. I need a macro to move around in my document from {} to {}. Does anybody know how to create a macro that will help me please? Thank you so much! ...

Can you do jump codes in short hand like you can do in chart script/word? Any help appreciated. TIA. ...

just got an e-mail from the Q saying that, for the fouth time, they have not received my hipaa certification...anyone else get this runaround??? ...

Can anyone tell me how to do a jump code in shorthand? I have it in word but I need the code for Shorthand, I will be eternally grateful. ...

Can anyone tell me how to do a jump code in Shorthand, am desperate. I can do it in Word but need Shorthand code, will be eternally grateful (shine your shoes, diaper your babies, etc)! ...

position? I seem to have seen several of the same names over the past couple months at different companies where I know I applied many months ago. Some of them still as much of a "Jerk" as they were the first time around, not returning calls or emails even though they wanted to set up an interview. ...

Hi: I am hoping someone can help me with the above. I don't have much experience in the macro tools (although I have one to jump from field to field). This doctor is a psychiatrist who examines a client and then reports his findings sometimes to attorneys. He constantly in his report will want to quote and bold a statement or set of statements even within the same sentence. So he will say, Mr. ?? said quote bold blah, blah blah quote unbold, and then stated again quo ...

Hi again. So, I got the jump codes to work in my word documents by using ctl f9 but for whatever reason, it won't save on my template. Anyone have any suggestions on this issue? Also, how do I make a "macro" for numbering.... ??? ...

I need to set up jump points in a document in Word 2003 but do not know how. In other words, I want to replace a jump point or marker like @@ with text in an Instant Text entry. Anyone know how to do this? ...

Is there any way that one can make a JUMP-TO command on this platform? When I make a canned normal and want to just fill in my blanks, is there is an easy way to get to it? I could on DQscribe, but not sure how on Bayscribe. Thanks for your help. ...

It has been so long since I needed to do this - the macro to do this is on a long dead computer. I am creating macros for particular reports. After the heading and the : I would space twice and put a /. I had a macro that was called by the person who created it originally I suppose, pause. I copied that macro (named it pause) as a separate macro and assisgned it a keystroke (let's say F5). Then when I pulled up say the op note macro, to move to the next f ...

So I have all these templates to pull into a single document all the time depending on what the patient is being seen for. I also have to put the name, dob, etc, in a particular place in all of these templates. Is there anyway to make a macro that will ask me the pertinent info up front and then when done it all just populates ready for me to just type? This is in Word by the way. ...

Does anyone know if there is a code in Epic to jump from the physician provider's box to the transcription palette in radiology. If not, is there a jump code in Microsoft Word that could be used. New to Epic. It makes me dizzy. ...

Hey everyone. Why is my macro disappearing everytime I close word? I don't normally use macros but for this instance I am. I just created a simple macro by going into Tools, make new macro, etc. I test it out on word and it works. When I close out the word program and bring it back up and run that macro I just created it is not there. I'm not well versed with macros so I wrote down that it was saving it as a normal.dot (global template). Can anyone ...

Creating a jump macro on Radnet - daphilli

I cant help you but can you tell me how to do it in Word? I have - looked but cant find out how to do it. TIA nm

You don't need a macro in any version of Word. - sm

Thank you! I was getting stumped on opening a new doc from - the template I made. nm

Similar Messages: