SHORTHAND and RADNET

Does anyone at all use Radnet for radiology transcription? We can't see our line counts at all. It's "done by the supervisors" for us. And don't try pasting into Word for the line count because it's "calculated differently". There must be a way to see what they're doing? ...

Are there any RadNet users that know how to create a table in RadNet? Is it possible? I know how to create templates, but am stumped. I know tabbing is not an option; but, occasionally one of my physicians would like me to create a table and have been unsuccessful thus far. Thanks! ...

When we are in a report that requires a blank, and the report is corrected/changed by another MT in Cerner Radnet, is the line count from that report given to the MT who corrects/changes the report? In radiology, the long reports are the ones which tend to require some investigation or confirmation by physician, and of course, the long reports give us the lines. Is it true that we are essentially handing our lines to the MT fortunate enough to find our job in their queue for minor co ...

I use Radnet...Can anyone tell me how to create and use a jump macro for this program? I have asked at my company but no one knew what a 'jump macro' was. Perhaps called something else? I know how to do it in Word but havent figured it out yet for Radnet. Thanks. ...

Someone recently had an issue with Shorthand and Autocorrect both operating at the same time, and they were apparently fighting with each other, because both of them had some of the same expansions/corrections, so the user was getting duplicate text. I finally worked out a system for myself where Shorthand is used for actual expansions, shortcuts, etc. Autocorrect is restricted to correcting misspelled and mis-capitalized words.If I have done it correctly, never the twain should meet, and I can ...

I've been using Shorthand all along on my work computer and love it, particularly the fact that it works anywhere - email, Word, platforms, etc. I recently downloaded the trial version for my home computer, but, while it works fine in Word documents, it won't work at all anywhere else. Does anyone have any ideas on how to fix this? ...

Ok, I downloaded Short Hand expander program but, for the life of me, it looks just like the standard auto expander/auto correct that comes with word. I've looked over the very brief tutorial that came with it and I don't see where this will increase my productivity anymore than my current Word-based AC/AE work for me. All those Short Hand experts out there (and I believe there are at least a few of you), can someone tell me how this works differently than what I'm already usin ...

Does anyone know if Shorthand will work in MS-DOS? Thanks. ...

Do you have a Shorthand 10 program to spare me that's not limited only for 30 days? I just updated to Windows 7 and badly needs a shorthand expander compatible for Windows 7.here's my email just in case:top_v_gun@yahoo.com Thanks! ...

that message again about your Shorthand license will expire in ??? days? Just wondering if it's just me ~ or they trying to tell me I will not have a job in 20 days? ...

Since I'm unable to use MS auto correct with my current platform I explored Shorthand, a program I used years ago. They've gotten too smart for me. All I want to do is add words on the fly. The screen I get when invoking SH10 shows no way to save any entry I might make. Surely I'm missing something here. If anyone can point the way I'd appreciate it--enter text, save and move on. Thanks. ...

Does it work interactively in MS Word? Can you easily transfer your entries from Autocorrect to Shorthand? I was checking out Instant Text but apparently now you have to download it, not avail on disk. I think this means if your computer crashes and/or you want it on a new computer you have to RE-BUY it (at almost $200)...yeah I don't think so! ...

How do I transfer my Shorthand to Bayscribe word expander. ...

I would like to know a little more about the shorthand programs and which one is best to use? Thank you in advance. ...

I'm getting a company computer and will be working on that one and mine. They don't allow Shorthand (or any other program) to be put on their computer, so need to convert my Shorthand to Word autocorrect entries for the work computer. I would do it manually (you know, one entry at a time) but I have about 4500 entries and need an automated way. Thanks in advance ...

Don't know why this is not working . . . I need to get the "Suggestion Window Font" to a bigger size. I have changed the font to say Times New Roman 14 and it shows that it changed it in the "Suggestion Window Font" but when I go into my report and run a shorthand word it stays small, never changed. I got everything else to a bigger font except for this. I hit "okay" after I changed it. Any suggestions would be appreciated! Thanks! ...

I know that if you use Autocorrect, your information needs to be transferred over into Editscript. If you use Shorthand instead, how do you go about getting THAT information transferred over into Editscript? Thanks!!! ...

How do you import Shorthand entries into EditScript? Thanks!!! ...

I have heard that Windows 7 and Shorthand are not compatible. Does anyone have in information on this? Any alternative to Shorthand? ...

Can you import/upload entries from another program (Dictaphone ExText/Word Client) into ShortHand 10? ...

Does Shorthand work within DocQScribe - thanks. ...

Can anyone tell me if eScription works with Shorthand and, if it does, does it work well? Will be changing to eScription soon and need to know before purchase. Thanks for any help. ...

I just switched to Shorthand 10. I have 2 problems with it that are quite aggravating and wondered if anyone else had figured them out. First is the first letter of expanded capitalized phrases (in word list) never being capitalized. Second is the suggestion window is so far from the typing area that it is almost useless. Thank you in advance for any help. ...

I am utilizing shorthand as an expander. During entering shortcuts, I seem to be inadvertantly pressing more than one key (my flying fingers) that is shutting shorthand down in the middle of a report. It is a bear to try to finish a report without the use of shorthand (we do get so used to it). It there a way to turn shorthand back on while you are in a report, instead of finshing the report long hand and then closing down the transcription application and reloading it to bring ...

I am running Shorthand in the Acuity platform. When I type quickly, sometimes my shorthand entries do not expand. Is there anyway to fix this? TIA! ...

Does anyone know if Shorthand works with EXTText or do you have use the built in expansion program in EXText? If so, is there a way to copy your Shorthand entires into that program? Thanks in advance! ...

I have had Shorthand for about a year and have never had a problem with it. Recently I noticed some of the words I have in it type out wrong. Costing me a lot of time to have to go back and fix. Sometimes if I erase and type again, then it will come out correctly. Anyone have a similar problem with Shorthand? Would it have anything to do with my license expiring in about 3 weeks? ...

I know Bayscribe has its own expander, but is there a way to disable that and use Shorthand instead? ...

Can my expansion list I have created in PC Shorthand be copied to Escription? I will not be allowed to use outside software on the company computer and have a very extensive expansion library in PC Shorthand. ...

Anyone know how to jump to your blank fields to be filled in (-) set up in Shorthand in MSWord? One of the new accounts I am on requires us to type in Word and paste. In Meditech, F3 allows me to jump to the - throughout my Shorthand shortcuts. This does not work in MSWord. Any suggestions? ...

SHORTHAND and RADNET - Angela

I've used Shorthand with Radnet and it worked fine. - LaLaMT

Shorthand and radnet - Used it for 10 years - works well

Shorthand - Me

Similar Messages: