how do I toggle to standards

Is this not an option in the new platform? This is the toggle that prevented you from putting two capital letters together...i.e., typing She instead of SHe. I tend to do this a lot and would to enable this function if possible. ...

Think someone here gave me the name of a gizmo I could use to toggle between 2 computers using the same keyboard and monitor but cannot remember the name. Anyone here know? Thanks. ...

I have to type the stupid job, req @, id etc in word off the DVI, then I have to enter the same stuff into Meditech and keep losing the notepad and keep having to click back on it to type in the doctor id and time.... there has got to be an easier way to keep the notepad or something on the screen so I look at it while I'm entering the information. ...

I know the rule has always been if the report type has a standard with more than 6 headings that we can hit F11 and type the job. Now I sorta remember reading that was changing. Does anyone know if it has and what the new rule is? ...

This is just my observation. I am presently working on VR and have been for about 1-1/2 months. On my straight typing accounts, we followed the Book of Style and typed verbatim. VR is a whole different world. Where as we had to spell out abbreviations in the impression, plan, preoperative diagnoses, etc., with straight typing, on VR we are told to not expand abbreviations. We are also told that unless the statement makes no sense whatsoever to send it to QA, b ...

Just to let you all know, after talking with my CCM, what happened to me was an error and has been fixed. We *do* get paid for standards. Sorry if I freaked anyone, besides myself, out with my post. ;o) ...

Thanks for all your comments about inserting standards but I am not concerned about mistakes in them at audits. I am at the point where I don't care if I am fired. The point I wanted to make is that the quality of the standard from the hospital was horrendous yet obviously acceptable because it comes from them yet we are expected to be 99% accurate under the worst possible circumstances. If this weren't so pitiful and causing so many MTs so much distress, it would be ...

My hospital is transitioning into SR using APEX. We're being told that they want to base our expect standards on VBC (visual black characters), saying this is "the industry standard". Are the rest of you on SR/VR paid by VBC, lines, or minutes? What were the justifications given? We've been paid for the last 10 years by minutes so aren't thinking this is a good change. Any feedback would be helpful. We are a union shop so would love to hear from other ...

I've been with MQ for about 2 months now. I've noticed that many, many of the dictators use what we used to call "standards" or templates. We just inserted the canned text and made changes where indicated. Is this allowed? I know some has their own (crtl S), but can I make my own and use them? ...

When a report requires a standard be used and it is an ASR report, if the MT knows what the standard headings are, isn't it acceptable to just type in the headings in the appropriate places within the ASR, rather than pulling in the standard by Ctrl S? ...

Can anyone tell me if we are paid for standards brought into reports or only what we add to it? I did a very long OP note yesterday that had a large standard and quite a bit of dictation along with it and am surprised to see I only received 9.38 lines for it. Something doesn't seem right, I know I type more than 9.38 lines even without the standard! ...

Our facilities have many docs who say "insert my standard." Yesterday I got a new one which was beyond belief. The format was wrong; the PE was double spaced instead of single. Some of the headings were capitalized and some were not. There were spelling errors. No Murmurs, Rubs or Gallops appeared like so, etc., etc. Someone somewhere had to produce this PE and this is what the hospital is using as their standard. Next time I get a piece of crap like thi ...

Standard name doesnt even match what doc dictated,,the numbers he dictates dont match and the spelling...dont even get me started on that!!! ...

Anyone else get really annoyed when a doctor says "use my standard" and then proceeds to make half a dozen changes to it? What they would like us to do is remove part of the dictation, go down to the bottom, get the appropriate text, copy, delete, move it back to the correct place in the report and then, of course, edit it. Doing this multiple times is not only excessively time consuming but makes it very easy to accidentally delete text. Just curious if you are all doing this. ...

Okay, if you want me to be 99.7% then at least have the information in the normals/standards correct. Misspelled words, punctuation errors. Really? Have to go in and change a LOT in order to "attempt" to make 99.7%. Thinking I am no longer going to change them and when i get "nicked," I am going to say "that's how it was entered." Sorry for the rant. ...

Maybe I'm just looking in the wrong place, but it seems like with all the screwing over that some of these companies do to us (and I know it's no accident that they don't encourage us to communicate amongst ourselves), few people here are suggesting some way of getting together to "encourage" the companies we work for to screw us over less, or at least less painfully. I know there's a Fair Standards act, for example, that supposedly covers even us (working on production). Whi ...

Last night I did two fairly long duplex studies where the doctor says "use my standard" with a lot of "move this, take that out, insert this..." Not difficult, but time consuming. When I went in to look at my line count after my shift, I got a total of 20 lines for the two reports, or 16.48 cents! What gives with this? Did I miss the memo, or did they just not tell us? Next week they'll be asking us to pay them when we actually get work. :o( ...

Before I appear dumb to supervisor, can somebody tell me where do I find "MedQuist Standards and Guidelines?" ...

I am just curious as to what line count standards are out there. What are your line count requirements for the day and how much do you use your QA for things like missing encounters, unable to ID patients, incorrect work types? Where I work our standards are relatively lower than other places, however, we also are required to match encounters, determine the work type, send an email for each work type or inrcorrect MRN, create a temporary patient if we cannot find the patient anywhere in the s ...

I manage a transcription department and we went live with Escription a few months ago. I am working on setting standards for edited lines as well as putting together an incentive program. Would anyone be willing to share their policy for transcribed/edited lines and what they are currently paying for incentive. Thank you! Renee ...

my check was $100 less this pay and I am trying to figure out why. I know I had some reports with standards so I am wondering if this was why. Thanks for the help. ...

Can anyone give me Transcription Productivity Standards using voice recognition? ...

The U.S. Dept. of Labor requires time and a half pay for all hours over 40 worked in a work week. (I think only if employee status.) We are considered piecemeal workers and indeed are eligible for OT pay. "All time spent by an employee performing activities which are job-related is potentially "work time." This includes the employee's regular "on the clock" work time, plus "off the clock" time spent performing job-related activities (which benefit the employer). Potential ...

I am curious if MLS and/or QC/QA people working for Nuance are able to consistently meet their 99.5% accuracy rating while meeting the lines per hour requirements? ...

It seems opportunities are much narrower than I realized. I never thought I would be turned down for lack of experience as I have almost 30 years experience. I was turned down by two companies because althought I have a lot of specialty experience, my acute care experience only includes 1 year on ops as most of my work was at home for private physicians. I think so many experienced MTs have lost their jobs to technology that we have stiff competition. In the two I was turned d ...

I'm going to test this out myself the next time I use one. If this is true, sure would explain my slightly plummeting line count from usual no matter how hard I try. That would be some BS for sure. Makes you wonder why they make that "rule" that we are not allowed to make our own expanders from their standards!!!! AHA! Well, they have no way of knowing, so that is EXACTLY what I am going to do if I find out we aren't compensated for those standards. ...

I work from home part-time for a large hospital corporation locally, but we are constantly running out of work and being asked to use PTO or VTO and take the day off. I'm running out of PTO and cannot afford to take the day off without pay. I don't need insurance or any of that, as I get it through my current employer but to supplement income I decided to apply at Nuance. A recruiter got back to me with the link to their pre-employment testing. My question is th ...

I am very interested in learning what the different 'guidelines' or 'requirements' are for those of you now doing SR editing. What is the minimum line count you are expected to have and is that reasonable? Thanks!!! ...

How may of us are sitting around waiting for work to come in? We are tied to our computers hoping for something but we get no pay for that time until maybe a report shows up. Then we sit and wait...and wait...and wait. Should we dare to walk away and something comes in, we get a smackdown if we miss the new and ridiculous 4-hour TAT. Well, this is what I found researching the U.S. Dept of Labor. Waiting Time: Whether waiting time is hours worked under the Act depe ...

how do I toggle to standards - forgetful

Standard access - MT considering change

CP? - forgetful

CP client profile ;) - forgetful

F5 good way to bring up client profile. - not sure why Ctrl+S not working for you

i dont know why either - forgetful

Similar Messages: