A community of 30,000 US Transcriptionist serving Medical Transcription Industry


Question - standards/F11 - MT


Posted: Jun 09, 2011

When a report requires a standard be used and it is an ASR report, if the MT knows what the standard headings are, isn't it acceptable to just type in the headings in the appropriate places within the ASR, rather than pulling in the standard by Ctrl S?

 

 

I used to do that, but somehow they can tell - MQMT

[ In Reply To ..]
because I got a warning about it and told to pull the standard in using ctrl S, so I am guessing there must be something in those standards used in the back-end formating that we cannot see. However, I have copied some reports with standards into my expansions and use those and have not heard anything about it.

standards - MT

[ In Reply To ..]
Thanks for your reply.

Maybe the best way then is to pull in the standard and then copy and paste the ASR under the appropriate standard heading?

Generally, that's what I do. - dnr

[ In Reply To ..]
That seems to be fastest for me, plus it is an easier way for me to keep track of the numbers. Although just plain typing left, right, etc is faster, but most of the standards I get have detailed implant information. I do still full listen.


Similar Messages:


ASR And Standards
Dec 08, 2009

I know the rule has always been if the report type has a standard with more than 6 headings that we can hit F11 and type the job.  Now I sorta remember reading that was changing.  Does anyone know if it has and what the new rule is? ...


VR Standards
Dec 23, 2009

This is just my observation.  I am presently working on VR and have been for about 1-1/2 months.  On my straight typing accounts, we followed the Book of Style and typed verbatim.  VR is a whole different world.  Where as we had to spell out abbreviations in the impression, plan, preoperative diagnoses, etc., with straight typing, on VR we are told to not expand abbreviations.  We are also told that unless the statement makes no sense whatsoever to send it to QA, b ...


FYI - Standards
Jan 08, 2010

Just to let you all know, after talking with my CCM, what happened to me was an error and has been fixed.  We *do* get paid for standards. Sorry if I freaked anyone, besides myself, out with my post. ;o) ...


More About Standards
Jul 25, 2012

Thanks for all your comments about inserting standards but I am not concerned about mistakes in them at audits.  I am at the point where I don't care if I am fired.  The point I wanted to make is that the quality of the standard from the hospital was horrendous yet obviously acceptable because it comes from them yet we are expected to be 99% accurate under the worst possible circumstances.  If this weren't so pitiful and causing so many MTs so much distress, it would be ...


SR Pay Methods/standards
Nov 05, 2009

My hospital is transitioning into SR using APEX. We're being told that they want to base our expect standards on VBC (visual black characters), saying this is "the industry standard".  Are the rest of you on SR/VR paid by VBC, lines, or minutes?  What were the justifications given?  We've been paid for the last 10 years by minutes so aren't thinking this is a good change.  Any feedback would be helpful.  We are a union shop so would love to hear from other ...


Standards/templates
Dec 16, 2010

I've been with MQ for about 2 months now.  I've noticed that many, many of the dictators use what we used to call "standards" or templates.  We just inserted the canned text and made changes where indicated. Is this allowed?  I know some has their own (crtl S), but can I make my own and use them?  ...


Are We Paid For Standards?
Jul 05, 2012

Can anyone tell me if we are paid for standards brought into reports or only what we add to it?  I did a very long OP note yesterday that had a large standard and quite a bit of dictation along with it and am surprised to see I only received 9.38 lines for it.  Something doesn't seem right, I know I type more than 9.38 lines even without the standard!   ...


Inserting Standards
Jul 23, 2012

Our facilities have many docs who say "insert my standard."  Yesterday I got a new one which was beyond belief.  The format was wrong; the PE was double spaced instead of single.  Some of the headings were capitalized and some were not.  There were spelling errors.  No Murmurs, Rubs or Gallops appeared like so, etc., etc.  Someone somewhere had to produce this PE and this is what the hospital is using as their standard.  Next time I get a piece of crap like thi ...


How Do I Toggle To Standards
Oct 24, 2012

When I am in a job, and the doctor requests standard, ctrl S does not always toggle me to the standard list.  Is there another way without using my mouse?  thank you in advance.  ...


Who Writes These Standards
Oct 24, 2012

Standard name doesnt even match what doc dictated,,the numbers he dictates dont match and the spelling...dont even get me started on that!!! ...


Doctors Using Standards
Oct 31, 2012

Anyone else get really annoyed when a doctor says "use my standard" and then proceeds to make half a dozen changes to it?  What they would like us to do is remove part of the dictation, go down to the bottom, get the appropriate text, copy, delete, move it back to the correct place in the report and then, of course, edit it.  Doing this multiple times is not only excessively time consuming but makes it very easy to accidentally delete text.  Just curious if you are all doing this. ...


Normals/standards
Apr 22, 2014

Okay, if you want me to be 99.7% then at least have the information in the normals/standards correct.  Misspelled words, punctuation errors.  Really?  Have to go in and change a LOT in order to "attempt" to make 99.7%.  Thinking I am no longer going to change them and when i get "nicked," I am going to say "that's how it was entered."  Sorry for the rant. ...


Fair Standards Act/getting Together On This Stuff
Jan 04, 2010

Maybe I'm just looking in the wrong place, but it seems like with all the screwing over that some of these companies do to us (and I know it's no accident that they don't encourage us to communicate amongst ourselves), few people here are suggesting some way of getting together to "encourage" the companies we work for to screw us over less, or at least less painfully. I know there's a Fair Standards act, for example, that supposedly covers even us (working on production). Whi ...


When Did We Stop Getting Credit For Standards? - Sm
Jan 06, 2010

Last night I did two fairly long duplex studies where the doctor says "use my standard" with a lot of "move this, take that out, insert this..."  Not difficult, but time consuming.  When I went in to look at my line count after my shift, I got a total of 20 lines for the two reports, or 16.48 cents!  What gives with this?  Did I miss the memo, or did they just not tell us?  Next week they'll be asking us to pay them when we actually get work. :o( ...


Medquist Standards And Guidelines
Mar 10, 2010

Before I appear dumb to supervisor, can somebody tell me where do I find "MedQuist Standards and Guidelines?" ...


What Line Counts Standards Are Out There
Jul 29, 2010

I am just curious as to what line count standards are out there. What are your line count requirements for the day and how much do you use your QA for things like missing encounters, unable to ID patients, incorrect work types? Where I work our standards are relatively lower than other places, however, we also are required to match encounters, determine the work type, send an email for each work type or inrcorrect MRN, create a temporary patient if we cannot find the patient anywhere in the s ...


Standards For Edited Lines
Sep 15, 2011

I manage a  transcription department and we went live with Escription a few months ago.  I am working on setting standards for edited lines as well as putting together an incentive program.  Would anyone be willing to share their policy for transcribed/edited lines and what they are currently paying for incentive. Thank you! Renee ...


Do We Get Paid For Pulling In Standards?
Feb 10, 2012

my check was $100 less this pay and I am trying to figure out why.  I know I had some reports with standards so I am wondering if this was why.  Thanks for the help. ...


Transcription Productivity Standards
Apr 11, 2012

Can anyone give me Transcription Productivity Standards using voice recognition? ...


Fair Standards Labor Act
Oct 28, 2012

The U.S. Dept. of Labor requires time and a half pay for all hours over 40 worked in a work week.  (I think only if employee status.)  We are considered piecemeal workers and indeed are eligible for OT pay.  "All time spent by an employee performing activities which are job-related is potentially "work time." This includes the employee's regular "on the clock" work time, plus "off the clock" time spent performing job-related activities (which benefit the employer). Potential ...


Nuance Quality Standards
Nov 26, 2013

I am curious if MLS and/or QC/QA people working for Nuance are able to consistently meet their 99.5% accuracy rating while meeting the lines per hour requirements? ...


Tightened Standards In Hiring (sm)
Mar 17, 2014

It seems opportunities are much narrower than I realized.  I never thought I would be turned down for lack of experience as I have almost 30 years experience.  I was turned down by two companies because althought I have a lot of specialty experience, my acute care experience only includes 1 year on ops as most of my work was at home for private physicians. I think so many experienced MTs have lost their jobs to technology that we have stiff competition.  In the two I was turned d ...


I Have To Comment On The Below Posts About Not Getting Paid For Standards...
Jan 06, 2010

I'm going to test this out myself the next time I use one.  If this is true, sure would explain my slightly plummeting line count from usual no matter how hard I try.  That would be some BS for sure.   Makes you wonder why they make that "rule" that we are not allowed to make our own expanders from their standards!!!!  AHA!  Well, they have no way of knowing, so that is EXACTLY what I am going to do if I find out we aren't compensated for those standards. ...


Nuance Flexibility & Standards Questions
Dec 04, 2013

I work from home part-time for a large hospital corporation locally, but we are constantly running out of work and being asked to use PTO or VTO and take the day off.  I'm running out of PTO and cannot afford to take the day off without pay.  I don't need insurance or any of that, as I get it through my current employer but to supplement income I decided to apply at Nuance.  A recruiter got back to me with the link to their pre-employment testing.  My question is th ...


Speech Recognition Quantity Standards
May 01, 2014

I am very interested in learning what the different 'guidelines' or 'requirements' are for those of you now doing SR editing.  What is the minimum line count you are expected to have and is that reasonable?  Thanks!!! ...


Fair Labor Standards Act Info
Dec 01, 2014

How may of us are sitting around waiting for work to come in?  We are tied to our computers hoping for something but we get no pay for that time until maybe a report shows up.  Then we sit and wait...and wait...and wait. Should we dare to walk away and something comes in, we get a smackdown if we miss the new and ridiculous 4-hour TAT.  Well, this is what I found researching the U.S. Dept of Labor.   Waiting Time: Whether waiting time is hours worked under the Act depe ...


Oh, Mmodal, Please Raise Your Quality Standards Again
Feb 16, 2015

fire MTs and keep demanding more OT.   As I have stated before, 99.5% is NOT about quality, it is about cutting pay and getting us to work even more cheaply. ...


I Downloaded The Labor Standards Complaint Form
Apr 05, 2012

For the great State of Wisconsin (as they say). All that free data entry we do, headers and so on - yeah, I'm gonna put a price on all that.  Go ahead and tell me, State of Wisconsin, that in the great United States of America, workers can be expected to DONATE their time and effort to a company, and it's A-OK.  Go ahead, tell me that - so I can add it into my video. ...


Where Do I Find M*Modal DocQscribe Standards And Guidelines?
May 20, 2013

Latest version, please.  Thanks for any help. ...


What BPMH Standards For Under Medication Section On LHSC In Canada?
Jan 13, 2014

Anyone know what BPMH standards for under medication section on LHSC in Canada? S/L  "Please see the BPMH" under the medication section. ...