Does anyone have any information on TCI Total Source? sm

Anyone ever heard of this company? They emailed me with an offer for an IC position, and I have no idea where they got my email. Just curious if anyone works for them or knows anything about them. ...

Patient had bilateral total hip arthroplasties. Under radiographs DR dictates "good calcar s/l nerve resporption." I know calcar resporption is appropriate in this context, but I have never heard nerve dictated along with it. Is this common or could I be hearing a stutter? Thanks! ...

Word through the grapevine is that our hospital is going to outsource to this company does anyone have any information on them. Apparently the company offers jobs to those of us working for the hospital. I know...it will probably suck. ...

A couple of things I just cant understand, this DR sounds like he is drunk this morning! "status post left s/l amelano total hip arthroplasty for AVN with collapse" "internal and external range of motion over the s/l sick or sit joint is quite benign" Patient received an injection into the SI joint, so I am wondering if he is saying SIC joint. Is the sacroiliac joint abbreviated in this way sometimes? Cannot reference that. Dr is getting ESR, CRP and sed rate to make sure there is ...

Does anyone other than me think that something is funny with this schedule source? I think some how it not counting times correctly. Anyone else have a problem with this? ...

I know how to find my PTO balance; but, how do you find out what it was at different dates previously, or if you even can. My PTO balance hasn't changed in over a month. If anyone knows, please let me know. Thanks in advance. ...

Tenderness to palpation in the interscapular region and s/o podutive source noted at T3-T4, T5-T6 area ...

How do I correct an incorrect logoff time in schedule source (cable was down for 2 hours). I've searched MQCentral but only got a blank page under "policies." I've gone to timesheet, clicked on clock, highlighted the incorrect time, red-flagged it, but I don't know how to change the incorrect time. Maybe I should just leave a note in the box and CCM will fix it? Thanks guys! ...

s/l "co-ki-heen" injection, most likely source of the patient's hepatitis C infection. thanks ...

I am used to people acting professional on these boards. I suggest, to all of you who like to slam people that are total stranters, to at least have the professionalism to address others on this board with some respect. Hearing acidic remarks from total strangers doesn't invite a professional response. I thought this was what this board was about. Ms. Diane Mortier ...

Just 3 reports for the last 10 hours. Keep checking and NO JOBS AVAILABLE! Moved to another group with primary. My old CCM said I would have more work if I move with my primary, instead, it turned out to be the opposite. ...

The cutting block was locked in position utilizing the (s/l 4 10 stylus). If I am hearing that right, do I hyphenate 4-10...? Thanks... ...

Okay, I can't make out what type of clamp he would be using. "The uterus was then clamped at the adnexa with large s/l K **"enely" ?? clamps". thanks in advance. bv ...

I had a great weekend. It was so nice. Takes so little to make me a happy camper anymore. ...

5 out of 5 bilateral strength in EHL, FHL, GSC, and TA. What do these stand for??? I know tibialis anterior but what are the other three?? ...

of course, most of the lines are VR but, I totaled my lines and the amount of $$ I made. Then I took the amount of straight typing lines I used to do and x by 8 cpl. I have more lines doing both straight and VR, BUT less pay. I averaged 1200/1300 lines per day working usually 6 hours (no set time schedule, just a mandatory "full-time" amount at old job). Last week, I missed 3 hours of work but did 7068 of a mix of ST and VR. Made almost 200 bucks les ...

Can someone please explain to me how the "total system hours" are calculated? My manager is always complaining that there shouldn't be a big difference between your hours clocked in on Webclock and your "total system hours" in Enterprise. I am wondering how they calculate these as I know it is not the time that you are clocked into Enterprise. I am guessing that they are somehow able to determine when you are actively working in Enterprise--typing, listening to audio, etc.? The thing that c ...

Could use some help here. The blank clearly sounds like "mail" or "male" but a previous report done by the same doc, same context, an MT has put the word "Mayo." I don't think that works here but I don't know what this term might mean. Anybody have any insight? Here is the sentence: At this point, we took the bed out of Trendelenburg, placed both legs on the ______________ , leaving the foot dropped, and closed our wound in layers. This is at the end of a hip replac ...

Hi any help really appreciated, cant locate anything even close.. Pinnacle, s/l "banton" acetabular component with a 28 mm Ultrex polyethylene liner. ...

A total knee arthroplasty. "We sized the femur to a size 4+ and made the appropriate cuts with the cutting block at 3 degress of external rotation. We sized the tibia to a size 4, made the appropriate drill holes and punch holes to accommodate the prosthesis. The *intra-arm* reduction had excellent stability through all ranges with a 10-mm poly prepared for cementing." ...

Have everyone work on the weekends so there's work come Monday morning. Spend entire days Monday through Friday, 10-16 hours per day, trying to get work, but only being clocked in for 6 to 8. But if you're anything higher than an MLS, you've got it made. You can adhere to your schedule AND have a life. I wish I could write how I really feel about these wage thieves. ...

*great ideas* ever actually turn out to be something BETTER? They always hype their BS up and then it turns out to be a huge let down, waste of time, and nothing but a HUGE Pain the ARSE. E-time sucked too, but this sucks EVEN MORE. They can't just leave bad enough alone. And for the life of me I can't figure out where to see our PTO hours. That was easy in E-time. Can anyone tell me where to find this? I'd greatly appreciate it. ...

Anyone else getting an error when trying to access Schedule Source? At first it said they were updating and would be ready in about 90 seconds, but now getting an application error. ...

Does anybody know what the conflicts number means when putting in for a day off in Schedule Source? I've been sick for 2 days, logged it into days off section in Schedule Source, CCM approved my time out but it still shows as requested and not approved in Schedule Source. ...

When I log into schedule source, the clock icon is not there. I cannot click anything to actually clock in. Anyone else having this problem? ...

Is ANYONE else having problems with SS/TW not showing the windows on left side of screen to go in and look at timesheets, collaboration or swap board. Whenever I go in to clock the first time for the day, then it is there, then when I go to clock out I have a blank white screen to the left. It does not matter what I do, even shutting down my puter and going back in. It is taking my clock ins and outs, but if I wanted to use anything else on SS I cannot!!!! This is i ...

I forgot to log off this afternoon. Anybody know where, on Schedule Source, to correct this? Thought it was "request days off," but that won't let me enter any my times. ...

Did I miss something? I couldn't clock on as usual, but had to click on a "task" first. I don't remember reading about any change in logging on. ...

Does anyone have any information on TCI Total Source? sm - curiousMT

If I were you I woukd run far far away - very very fast....SM

Beware - longtimemt

Owner is a nice lady...sm - BTDT

Similar Messages: