How do I get from the Job Edit page - on enterprise back to the document page

I have a question about Smartype and I will try to make it so it is understandable:) I bought Instant Text because I had to have some way of moving my Smartype over into Word 2007 (I had Word 2002). I have Instant Text turned off until I learn the new platform on the new company I am with. My problem is this, the Smartype line will not move with the page so when I get to the bottom of the page it covers up everything at the bottom and I can only manually move Smartype by scrolling back up ...

I am interviewing for a job that would be three days in office and two days at home. They requested my salary requirements, and would like to know what I would charge per page and half page for work done outside of the office. I have never had to worry about this before, and I am not sure what to say. Any suggestions would be greatly appreciated!! I have been an MT for four years, two in a hospital and two working from home for different doctor's offices. ...

What in the world did they do to the cc list? I can no longer edit anything. Grrrr. ...

We've all heard that, right? Someone should inform QA to not over QA then because adding in "a" or "the" or "an" is overediting! Plus, we get dinged for it. I'm so over this BS. I am literally so nervous now when I sit down to work. Yesterday, I slowed playback down to the point that I did 700 lines LESS than I had been doing just to see if this made any difference. Nope. Still got hit with a, an, the crap from QA. If tomorrow's big ...

How do I edit/work on adding expansions when I get NJA and can't get in to type? ...

Just wondering...when the documents are imported into the client's system, can their doctors edit them if they find an error before they sign off on them? When I worked in-house, the doctors could either edit the report or re-dictate whatever we had blanked. I'm just guessing that the reports go to a queue for the doctors to "read" and then sign since, legally, they are ultimately responsible for what they dictate. Just wondering if anyone knew. TIA. ...

Does anyone know of any companies out there that pay 4 cpl or above as an IC VR editor? Looking for work and all of them pay horrible. Thanks ...

I would like to get an early jump on learning this program. Is there a list of instructions or manual somewhere that I can download? ...

I was reading somewhere on here where FastChart said one of their VR editors edited 53,000 in a payperiod!! ...

I'm sure this question has been asked before, but how many lines on average would you say you can edit with ASR per hour? I think the most I have ever been able to do was around 250 myself. I just wondered how I measured up with other MTs with the ASR jobs. I remember a couple of years ago not long after MQ started up with ASR getting a company email describing an MT (no name was given) who could edit over 600 lines per hour and over 400 with straight transcription. ...

Just wondering what peoples' average edit lph is? I realize the type of platform, account, dictators, etc. come into play, but is 500 lph a dream, particularly with escription? TIA ...

I think the platform is great. I use most of the important hot keys to increase speed, do not use the mouse much, and rely on the keyboard. The dictators are crystal clear. The editing is minimal; it's the cleanest I have seen in my experience. My internet connection is fast. I am not having any technical problems. The account specs are simple and clear. To make the same in VR as I was with traditional transcription, I would need to do 300 VR lines per hour, and I just can& ...

Am I the only one who is constantly dealing with these issues? 1. Lines of text overlapping eachother into a confused jumble. If you highlight the document, some of of this will resolve and go away, but not all of it. 2. When leaving a pending note, the text I took 2 minues to thoughtfully word out just dissappears completely, and I have to type the whole thing all over again. 3. When leaving a pending reason, the drop-down menu will randomly pick a reason for me, and I have ...

What is the difference between edit script and escription? I am considering platforms at various transcription companies and the transcription platform makes all the difference. Thank you to all who offer help. ...

Hello. I have just edited my first 5 VR reports ever. It seems like ther must be a more efficient way to do it than what I was doing. Every time I needed to make a change, I had to stop the recording and manually move my cursor to the right place. I wish the Word cursor moved along with the dictation. I'm sure this must be a learning curve thing. Any tips would be greatly appreciated. Thanks! ...

Can anyone who uses ES think of a reason why the AutoCorrect feature stops working? I know that the "replace as typed" box is checked before I start the program. Also, sometimes the ES toolbar doesn't respond. I can click on it over and over again and no response. Any ideas and/or suggestions to resolve this problem would be appreciated. ...

Just trying to figure a few things out before accepting a position for radiology editor. Thanks in advance ...

not delete it? am I blind is there a delete button somewhere? ...

Does anyone here use EditScript v10? I am in a perpetual state of confusion regarding how things are calculated at Nuance. In v10 there is an RDR mode, in which we review our reports that have been corrected and get our accuracy percentage. But, there is also FIESA, which for me has a different percentage (sadly, much lower). I've noticed that FIESA generally only generates about 1 report per day for me, which doesn't seem very accurate. My percentage with RDR is 99%, an ...

I'm getting paid 10cpl to edit. Is this a good rate? Spaces are not included. Thanks! ...

Not sure what type of report, the provider "stated nuclear medicine study T one-halves" Various research come up with too many variables of editing T one-half written out T one-half T-1/2 t1/2 What is the preferred version? Thank you ...

Can someone suggest the key strokes that they use for Inscribe for VR. Have tried the shortcut editing keys they have listed, but I don't see a couple on there, like how do you move the cursor to the voice? Thanks for any help. ...

After giving the information to QAM and TSM for more than a year, I am not giving anymore free time letting them know. ...

I was wondering if anybody out there was paid per line for Powerscribe and how many lines per hour do you edit on average? I have always been paid a report rate for Powerscribe Radiology. Also, which version do you use? Thanks!! ...

I just started training on Edit Script 9 today. I was wondering if anyone from TransTech who is using Instant Text (I am using the Instant Text Pro V version) could contact me and tell me how you have your Instant Text configured to work with Edit Script 9. For some reason, my Instant Text Pro V did not work with Edit Script 9. I did go to the Instant Text website, and some have been able to use IT Pro V version with Edit Script 9. There was also mention of an upgrade to version 7. ...

I got input back from the client QA with blanks they filled in. Amongst the corrections, there was text I remember editing and the text now showing is ASR I had deleted. This is a job I did the other day, and this is why I can remember it. It was rather stupid ASR that I corrected. ...

Thinking of applying at Nuance, what is the average line count that MTs can edit per hour? ...

This question sounds too stupid to ask my TSM, so I am asking you experienced folks. How do I change my spell check in Edit Script so that it will automatically spell checks words in all caps? I am banging my head up against the wall - I feel like I have tried everything! Thanks!!! ...

I don't know what key I accidentally hit, but all my transcription has turned gray and unable to be edited while the headers that were gray have changed to black. Anyone know how to reverse this as I'm stuck in a report. I know this belongs in Tech Support, but felt it would not be seen there. ...

How do I get from the Job Edit page - on enterprise back to the document page

F9 - will take you back

How do i get from the Job Edit page - Bless you!!

Also if you hit Control H - while you are on the

Similar Messages: