in DQS7.1, where is the expander/macro file? I can't find it. Please help! nm

Which is better? What are the differences? I have been using macros in MS Word. I downloaded a trial version of a shorthand program once, but it was a little confusing and it seemed much more involved than recording a macro. Any advice/opinions appreciated! ...

I am trying to make a macro/expander for "-year-old" and in order for the expander to work right it needs a backspace but I don't know how to put a backspace in. Can anyone please tell me how. ...

Log into MModal email. Hover over Departments Click on Human Resources On left side of screen choose Learning and Development Then choose MT/ME. Then choose Training. Then choose DocQscribe 7 Two-thirds of way down page are 2 gray boxes that say DQS7 training. Under those are 4 red highlighted tutorials. Choose either the ones under the left or right gray bos depending on the resolution of your monitor. DO NOT open the last one titled DQS7 Confirmation until ...

When I signed off yesterday everything was fine and when I signed on this morning many of my expansions had a quotation mark at the beginning and missing the last letter of the expansion. Has this ever happened to anyone else? Does anyone know why it might have happened? ...

Can anyone tell me how to find the file on my computer that holds my text expanders for DocQScribe/Fluency. Any help would be greatly appreciated. ...

Does anybody know how to copy an ESP file onto a disc? ...

Does anyone know how to convert wma file to DSS file? I am using Express Scribe but, for some unknown reason, the sound quality is very poor. I thought if I could convert this to DSS it would sound better on my computer. Any ideas? Also, anyone know what else I could use besides Express Scribe (free) to play these files? THANK YOU SO MUCH. G ...

Is anybody else noticing part of ASR missing from DQS7.1 reports? Very frustrating. I feel like I am typing a majority of the report for SR crap pay. ...

I spend much more time editing than I used to because of no commas in lists of meds, etc. Come on!! I can't believe they couldn't program the *&$# thing better than that. And the HEADER thing!?! Willy-nilly-free-for-all headers. My Rant for Today. Thank you. ...

This company has never, ever introduced new software or a new account that did not have to have its intro postponed. You would think they might have learned by now not to make any announcements until all the kinks are worked out but no, not MQ. Yet the MTs have to be 99% accurate. Everyone else can just goof off. ...

I have a problem quite often, both in ASR when correcting or straight typing, where for some reason, the text from one line will drop to the next line when it clearly hasn't gotten to the end of the line I'm typing on...leaving only 1/2 line of text. This happens quite a bit. Anyone else having this happening? ...

Our region is scheduled to start DQS7 in a couple weeks, and we were required to watch the training video - way ahead of our start time. I don't think I'll be able to do this!! They talk about keystrokes I've never heard of, the fonts in the demo were so small I could barely read anything, They talked about pushpins I never did find! Is this as awful as it looks? Getting nervous. ...

Hi - Hard to teach me new tricks. Where do I d/l DOQ7? Thanks. ...

Did the training today. Was he speaking Greek?? I don't think I'll ever remember all of that. ...

as I thought. In fact, I did not sleep last night and my stomach was in a knot before I started work this morning. Basically, I worried myself sick for nothing. I am glad, however, that I went over the tutorials one more time last evening, so I think that really helped. Though the screen is visually different, most of the commands are still the same. The first report was slow going, took about 45 minutes to do because I was being sooooo very caref ...

on screen, teeny tiny letters when typing (hope I can change this), stupid QA note section at bottom is annoying as he!!. Hope I can adjust quickly cause this is a pain. ...

will not let me edit a job. its terrifying. ughhhh. I want dqs 6.1 back. ...

I'm supposed to start work later. No word from the CCM today. You'd think she would send out a reminder note or some hints or something. Nada. Zip. ...

Just starting DQS7.1 today and wondering about spacing between paragraphs. In ASR, when the dictator says next paragraph, it goes to the next line. Is this correct, or do I need to insert a hard return to make a like between the paragraphs? Anybody know? Don't want to mess up the formatting. ...

Hi: I am hoping someone can help me with the above. I don't have much experience in the macro tools (although I have one to jump from field to field). This doctor is a psychiatrist who examines a client and then reports his findings sometimes to attorneys. He constantly in his report will want to quote and bold a statement or set of statements even within the same sentence. So he will say, Mr. ?? said quote bold blah, blah blah quote unbold, and then stated again quo ...

I have 1/2 the required RAM, told by a microsoft website techie through a Serv Man ticket that DQS7 has shown to work OK with 890 RAM instead of 2. The MQ computer is struggling now AGAIN like last time when the system went down with the major upgrade - slow whirring computer, always downloading or updating Kapersky or some mystery software or action. Speech is so slow I have to wait for it to correct - this especially in long jobs. Anyone else have these intermittent - but lon ...

Back from vacation. Logged into the new 7 version - would not work. Tried a few times. Called Support. 1-1/2 hours - no luck - they will contact Advanced Support. Will try again tomorrow. They estimate it will take 2-3 hours to fix it. Meanwhile CCM instructed to do straight typing on version 6. Like heaven - the old days. Anyone else have this experience ? TIA ! TGIF ! ...

I recall getting an email awhile back telling us we were starting DQS7 on 9/17. But not a word from CCM about training. How long does the training take? ...

It has been so long since I needed to do this - the macro to do this is on a long dead computer. I am creating macros for particular reports. After the heading and the : I would space twice and put a /. I had a macro that was called by the person who created it originally I suppose, pause. I copied that macro (named it pause) as a separate macro and assisgned it a keystroke (let's say F5). Then when I pulled up say the op note macro, to move to the next f ...

So I have all these templates to pull into a single document all the time depending on what the patient is being seen for. I also have to put the name, dob, etc, in a particular place in all of these templates. Is there anyway to make a macro that will ask me the pertinent info up front and then when done it all just populates ready for me to just type? This is in Word by the way. ...

Did I download something wrong, or am I hitting the jackpot and getting all transcription jobs? This is an account I usually work on and these are usually speech rec jobs... ...

Hey everyone. Why is my macro disappearing everytime I close word? I don't normally use macros but for this instance I am. I just created a simple macro by going into Tools, make new macro, etc. I test it out on word and it works. When I close out the word program and bring it back up and run that macro I just created it is not there. I'm not well versed with macros so I wrote down that it was saving it as a normal.dot (global template). Can anyone ...

I've been having problems with my macros "sticking." I'll make one, and the next day it doesn't work. I'll go into the list of macros and it'll still be there, but the command won't work. I just made one that removes the cc line if it isn't used. I'm curious to see if it's still there when I log back in tomorrow. Any idea why this happens? I was a pro at editing my macros in the dinosaur days of DOS but not now, so I don' ...

(risedronate sodium) tablets Sub ChangeControl1Key() CustomizationContext = ActiveDocument.AttachedTemplate KeyBindings.Add KeyCode:=BuildKeyCode(wdKeyControl, wdKey1), _ KeyCategory:=wdKeyCategoryMacro, Command:="AddMedToAutoCorrect" End Sub Sub AddMedToAutoCorrect() Dim BrandString, GenericString, Title, Message, LittleString Title = "WordExpress Transcriptions" Message = "Type in brand name of medication as you would like it " _ & "to appear in your text:" ...

in DQS7.1, where is the expander/macro file? I can't find it. Please help! nm - nm

The file that used to be "user.aco"? Anyone? nm - nm

Hit F4 to activate - DQS 7.1 User

Yes. But I want a copy of my own expansions. I want to find the FILE. Anyone know? nm - nm

good question, Im looking now - x

We used to have instructions, but I think now - L&L

I went into, - and found a user aco file

What was the date on your user.aco file? The one I found was from 2009. nm - nm

I suspected that. Reinforces my decision to submit my resignation yesterday. nm - nm

Over an expansion file? Whatever. More jobs for everyone - else. nm

its actually good to save your file - sm

Exactly. I don't plan on doing transcription again, but it would have been nice to have the ex - nm

(oops) expansions just in case, I meant. nm. - nm

Similar Messages: