A community of 30,000 US Transcriptionist serving Medical Transcription Industry

Work load - zimmy

Posted: Jan 20, 2010

Is there any way to know how much work is available?? Just wondering because randomly yesterday my account ran out of work which is actually quite unusual for me. So I was just wondering if there was any way to see how much work was available in a certain account?? Thanks for any help!

There is a backlog list - Anon

[ In Reply To ..]
You can get to the backlog iist through DocQmanage. When you log in with your ID number. If your ID is 4 number, add two zero at the beginning, followed by "dep" (001234dep) then your regular password. This will give you a list of all the hospitals. Click anywhere in the text box and look for your account.

not working..... - zimmy

[ In Reply To ..]
I'm not sure why, but that does not seem to be working for me. I have a 6 digit user name and I put the dep behind it with my regular password and regular company number but it just denies me access.

P.S. - Anon

[ In Reply To ..]
When it opens, clock on "status" on the left side.

It didn't work for me at first. I had to call support and they helped.

backlog - el

[ In Reply To ..]
Do not use your regular hospital #, just leave it blank. It should provide the correct # If not, call support.

support number - zimmy

[ In Reply To ..]
anyone have the support number off hand....I can't seem to find it, only the email.

Thanks!! - zimmy

[ In Reply To ..]
Thanks so much for all your help. Had to call support but I got it to work.

Similar Messages:

Feb 23, 2010

at all. Every time I log in it takes forever and nothing happens. So frustrating! This is my shift! I keep checking the stop light and it says GREEN everything is working! Not my night. ...

Jan 29, 2013

They are just not delegating the work adequately. This is my biggest pet peeve of all time. There will be several thousand jobs in my region and my accounts run out...and then I sit...and wait...and nothing. They say change your hours, well guess what? I already work mostly 2nd shift. "Make up time on Saturday." There is no work, apparently, on Saturday anymore either! In looking at the numbers, certain hospitals seem to never run out, while others are just bone dry. Overstaffe ...

Feb 14, 2010

Have a laptop I want to load McAfee on. We used to have a download available on Qnet, but Qnet is no longer there on the old Medquist web site. Anyone know where it might be now? ...

Aug 23, 2010

x ...

Nov 09, 2010

I tried to get DocQScribe to load from the DocQManage page for over an hour and finally had to send in a ticket. Is anyone else having this kind of trouble with the system. It showed a green light on DEP. This is getting rediculous. I could not work my scheduled shift on Sunday because there were no jobs available (but incentive stayed in place). Now I cannot work my scheduled shift because of something else. I don't know about anyone else, but with a fam ...

Dec 03, 2010

Just wondering if you run out of work a lot? Looking to work the early afternoon/early evening shift and I want to work and not just sit there! ...

Jul 04, 2013

The suits are getting creative in countering our truth-telling, that's for sure! ...

Jul 17, 2013

Finally quit. Except for leaving MM I have never felt such a load taken off my shoulders. I am going to a hospital system where historically they do not treat people like robots, or slaves. I was going to try to hang on here, by hermiting (do my job and not look at e mails, etc) but decided to try to get out and with a lot of job hunting it worked. I still cannot believe how much pressure has lifted. Oddly I no longer feel depressed. I guess now I know what was causing my sadness... I am not say ...

Nov 11, 2013

...

Jan 28, 2010

We have been getting notes saying we have "critical backlog", when we usually get NJA. I'm wondering if we can start sending notes saying "critical pay check deficiency" when we get NJA. Since we are kept informed, maybe we should keep them informed also. ...

Mar 31, 2010

Always the same old song and dance. The subject of MTs needing more pay per line comes up, and what does the speaker do? Redirect the focus on all the added "upgrades" to their software they plan to buy (probably for hundreds of thousands of dollars) to "help us be more productive". Got news for them. You can only go SO fast. There IS a limit. And after all the emphasis on accountability and accuracy, do they not see that speed just increases errors ...

Jul 22, 2010

Am I the only one who runs out of work? I find it very hard at night to keep going with the dreaded no work available. At least during the day, you can clean house, email, pick up the telephone, etc. During the night, you are limited to surfing and staring! Then I am too sleep deprived to pull extra hours to make up for missed line counts. I am doing third shift for the extra incentitive but it doesn't work in my favor if I run out of work! Any ideas? Cur ...

Jun 19, 2012

I had Sunday and Monday off, as usual. Late yesterday I tried logging into e mail to see if I missed anything, could not. This morning, in anticipation of my shift at 2:00 I tried to log in to e mail, intranet would not load. Is it just me? What do we do if e mail is down? I hope the clock is working, anybody who can please catch me up to speed... Thanks. ...

Nov 10, 2013

x ...

Jan 22, 2014

seems a bit excessive 1+ hours to load updated cornerstone? ...

Oct 27, 2014

Hi all...I had to reformat and have found Enrich and the Webclock, but not the Nuance e-mail and SPARK programs. Not very good with computer stuff. Anyone have the actual addresses of these? Thanks ahead. I should have written them down before reformatting. ...

Mar 20, 2015

seems to have been doing this lately. They do load but sometimes they seem to hang up. ...

Apr 23, 2015

Anyone know what happened to the work load for IMedX? Should I be looking for another position? ...

Feb 16, 2012

Happened in the past, pops up says audion unable to load you cant transcribe this job and then bypass to another job? Second time in a row now. ...

Feb 11, 2013

x ...

Jun 04, 2013

Is that correct? He says Hepatitis C. Most recent viral load was 6 x 10 to the 6th copies. ...

Aug 23, 2010

I quit MQ a few months ago. I loved my account and miss it. I am wondering if a certain North region is low on work too, specifically the one whose CCM lives in the same region as most of the accounts. The large teaching hospital always was backlogged, with lots and lots of work. But I won't bother to reapply if the work is low. ...

Jun 20, 2011

nm ...

Mar 06, 2012

I just got a new laptop and I installed express scribe, which I use on my desktop, and could not load any wav files on the laptop. I did windows updates and that seemed to fix the problem, the files that day I was able to play. A file that came in today I am unable to play though, but still can play the other files from Friday. They are all wav files and on my desktop I can play them all, just not my laptop. Does anybody know what could possibly be going on here? Thanks for all the hel ...

Feb 26, 2013

I cant get signed on yet again..normally takes a while for it to load normally..Then I go to the windows mail (which wont let me send a message) and that gives some kind of message about mail not loading..you would think a HUGE company had a better email system..really not a very hard thing to set up... ...

Jun 18, 2015

Nm ...

Mar 18, 2010

I basically would like to grab my work from an FTP site, transcribe it in word, and upload it back. Are there any companies that still do that? ...

Feb 11, 2011

Hello, I am finally getting my Dr. to move into the 20th century. Have a new Phillips 9600 digital recorder, new foot pedal and headset and downloaded Express Scribe. ExpressScribe will not play any files I try and transfer. I get an error telling me I need to go to their website and get a component file for dss.322.exs yes it says dss.322 not dss.32 LOL THere is NO such file there. Anybody have any suggestions?? I really dont want to have to pay like 30 b ...

Jul 13, 2012

I recently downloaded the free version of Express Scribe. The "Welcome" message plays with no problem, but any file that I try to load plays super-fast. I am pretty sure I checked all the settings, such as F10 (normal play back speed) and the speed control in the bottom right hand corner. If anyone can help with this I would appreciate it. I did send an email to tech support but will probably never get an answer b/c I didn't purchase it. ...

Jun 13, 2015

Nm ...