A community of 30,000 US Transcriptionist serving Medical Transcription Industry


Slow cursor... - Ginger


Posted: Oct 02, 2014

Does anyone else have this problem? I can type a few words or a lengthy sentence, but the cursor is super slow and lags behind. Not only that, but the audio will just keep going until the cursor finishes "typing" what I did and will not respond to the foot pedal. Sometimes it can take quite awhile for the cursor to catch up.

slow cursor - anon

[ In Reply To ..]
This happened to me today also. I rebooted my computer and now everything seems to be working normally. Good Luck

Sounds like there is something sm - Cherylsue

[ In Reply To ..]
running in the background on your computer?


Similar Messages:


HELP With VR Cursor
Jan 30, 2010

Does anyone out there know how to get the voice cursor to move to the word cursor on EditScript.  Mine appears to be stuck at the very beginning of the document I am working on (not in the top header, but in the body).  My ALT keys won't move it, and I can't get it to move in the editing toolbar either. I'd like to know how to dislodge it from the beginning of the body.  Any suggestions would be VERY helpufl!!  Thanks! ...


How To Keep Cursor Where I Put It?
Dec 03, 2011

Help, I forget what to do to keep the cursor where I put it.  It is now going to wherever the dictation is and the doctor said to go back to admitting diagnosis and put something in but the cursor keeps going back to end of page where the dictation is.  I forget what maneuver/keys to click to keep the cursor where I put it.  Thank you. ...


Cursor Question
Jan 27, 2010

Does anyone know if there's a way when you used your control+arrow (lt/rt) key to skip over a word, if there's some way I can arrange it so the cursor ends up at the end at the word instead of at the beginning of the next word?  I find more often it would help if the cursor landed at the end of the word I'm skipping rather than the beginning of the next word.  Too much backspacing throughout the day. Ha, and I'm sure some of you thought I meant to put "c ...


Erratic Cursor
Dec 04, 2010

I am working off a laptop - Dell Inspiron 1520.  It is almost 3 years old now.  For the first 2 years, I did not have this problem but, all of a sudden, I developed this erratic cursor problem.  My hand placement has not changed - and, yes, hands tend to float over the touchpad while typing - that's unavoidable - but, again, did not present a problem for the first 2 years.  Why all of a sudden now?  I will be typing and suddenly the cursor is off in No-Man's-La ...


Cursor Size In DQS 7.0
Jul 24, 2012

Anybody know how to change my cursor size while working in DQS 7.0?  It's just a thin little line and I used to have it like a highlighted box which was easier to see.  Thanks. ...


More Than Fed Up With No Highlight For The Cursor
May 18, 2014

If we can put a man on the moon can we not get the highlighter back for the cursor location?  I'm wasting so much time trying to find where I am when I'm researching a drug or something that takes me away from the text.  This is a real handicap and costing me dearly! ...


Got A New MQ PC Today. Cursor Question
Oct 07, 2010

While reviewing a report, I use my right arrow key to follow along and it is moving very slowly and seems to stop at every single letter even with keeping my finger on the arrow button.  Does anyone know how to make the cursor just move and not stop at every letter.  I know you can hit Control plus arrow key to make it go faster, but that speeds it up super fast.  It is a blessing for a new PC as I had a virus, but it is also a curse because you have to set everything up to the ...


Attach/detach Cursor?
Jul 15, 2012

I am about to start on DQS7.  I'm not sure I like that detach/attach cursor thing.  Is anyone using it and how do you like it? ...


7.1 Cursor Size- Can We Change It?
Oct 10, 2012

Does anybody know how to change the size of the cursor from the skinny little line in 7.1? Thanks! ...


Is There A Way To Enlarge The Cursor In Word?
Nov 24, 2014

Or at least get rid of that annoying red box? (I never use alt-k). My eyes keeping following the red box instead of the cursor.  I figure it I can enlarge the cursor it will be easier to find fast.  ...


Moving Cursor In EXtext
Jan 22, 2015

Hello,  I work for a local cardiology group and we use Nuance with Dragon (EXtext). I was wondering if there is a way to have the cursor move along automatically while I have the foot pedal down so I do not have to take my right hand off the keyboard to move the cursor with the right arrow button. If there is a way that would allow me to cut down on a lot of errors I am making by having to keep moving my right hand from the arrow back to the keyboard.  Thanks   ...


Voice Cursor/red Rectangle In EditScript MT
May 25, 2012

Hi everyone: Is there a way to turn off the voice cursor/red rectangle in EditScript MT - OTHER than the administrator doing it in eMon? I am A.D.D, and it is driving me OUT OF MY MIND! I'm guessing if you don't have A.D.D., then that little red rectangle won't bother you or at least you'll get used to it, but for me (and I'm guessing others like me), I don't see it getting any better. I already have so many distractions in my brain, and I really need that stupid re ...


Using The Attached Cursor, Does Anyone Actually Get It To Stop In The Right Place?
Mar 10, 2013

. ...


How Do You Disable The Red Rectangle Voice Cursor
Feb 20, 2015

. ...


ExEditor - Slowness, Cursor Dragging, Freezing
Dec 11, 2009

Anyone working on this and having problems with it?  I have been having problems with slowness, cursor dragging, freezing.  It is worse with longer reports, but is sporadic and I really can't find a definite pattern.  Anyone else? ...


Cursor "freezes"
Dec 19, 2010

Lately my cursor just freezes up - in the middle of my work, when writing e-mails, etc. All I can do is reboot - Have taken my mouse apart, cleaned it, but that does not seem to help. Any ideas? Thank you ...


Slow DQS
Feb 03, 2010

I would still like to hear from more of you about whether or not you have problems with DQS being slow.  Today was one of the worst days I have ever had.  I recently spent over 3 hours with support but no one has a definitive answer.  I can tell you all that when Kaspersky does a virus scan, you cannot work at all.  You may not even be able to get into Schedule Source to sign out.  No one in tech support can tell whether it is my computer, my DSL, or some other reason an ...


DQS Slow?
Aug 01, 2010

Is anyone else having trouble with DQS moving slowly this morning?  It's taking forever for the few jobs trickling in to download, ADT searches to run, etc.  I've been having some internet issues, so I'm not sure if it's me or DQS. Thanks! ...


DQS Slow
Sep 01, 2010

Anyone else noticing reports loading very slowly on DQS ...


Slow Work?
Oct 14, 2009

Is anyone else slow? So far this week I've had less then 40 small reports. ...


DQS Slow Or Not Working?
Feb 17, 2010

Is DQS having a problem today?  I cant download a report. ...


Slow Job Downloading
Feb 24, 2010

Anybody else sick of DQS sometimes taking forever to download a job and then being told that it is either our computer's fault or our internet connection??  My internet and computer has not changed since this started happening.  However, it did start when they updated DQS, but, of course, that can't be the reason! ...


Seems Strange That Everything In MQ Is So Slow.
Apr 13, 2010

Every site having to do with MQ is as slow as molasses.  Other Internet sites whiz along.  Trying to check MQ E-mail, clock in, etc. is always a draaaaaaaaggggg.  Is it their equipment or poor IT I wonder?  Either way, once again makes you wonder about their accuracy on any of our numbers.  Does their software "catch" everything or are some of my lines are flying past while it is dragging like a snail?   ...


Slow MT Transcription
Oct 14, 2010

Hi all, I am a new transcriptionist.  I have a job with a very small company that's doing transcription for a group of hospitals in Florida.  The lady who hired me is so nice.  She is training me and I am producing a quality product, but I am so slow!  I'm averaging about 100 lines per hour because I have to look some things up or the doctors take such long breaks to look things up in the record in front of them.  Also, the doctors tend to say one thing and the ...


Is DQS Being Real SLOW For Anyone Else?
Apr 05, 2011

I've had trouble logging in and uploading this morning.  Anyone else? ...


Is SoftScript Still Slow ?
Jul 11, 2011

Hello everyone It is always of interest to me what is going on with SoftScript.  One of my friends is still there and I haven't been able to get hold of her.   Does anyone know if they are still slow.  When I worked there it was extremely slow.   Now I have a job where I never run out of work.   Thanks everyone.  ...


Anyone Else Slow At Landmark
Jul 11, 2012

Don't know if it's because of the past holiday or what, but I've barely been able to make half my quota for the past 2 weeks! I don't recall a lull lasting this long before and I've been with them for a few years.  ...


DQS Is Very Very Slow This Morning.
Aug 02, 2012

What is going on with this system this morning.  It is barely moving. ...


DQM Extremely Slow
Oct 01, 2012

or whatever the term is this week? I have been trying to log in for 20 minutes and no go. TIA ...


System Slow?
Nov 11, 2012

anyone else's jobs taking forever to upload and download this morning? ...