FlashCount accuracy

I'm having trouble getting FlashCount to generate the numbers for my invoice. I go through all the steps, putting in the information, and when I click on the final/review link, it generates the invoice but with no numbers. Where there should be numbers, it is blank. Anyone know how to get this to work. I've used it in the past fine, but it's been awhile and maybe I'm forgetting something. -Thanks ...

I realize that this is no longer being supported but was wondering if anyone might be able to help me. I have Windows 8 and Office 2003 and so far this program is the only one that is even working for me to get a line count (tried most of those found when searching in Google). It worked for me the first few times but now I am only able to say it in a .txt file which at least populates everything into a list but doesn't add it up so I have to do that by hand. When I try to ...

Does anyone know where I can find a good clean download of this program? I have tried going to the mtstars.com website to the download site & after I hit the download button & then tell it to run, it comes back and says "Error in compressed file-bad CRC"--have tried numerous times. Can't find anywhere else to download it from. I had to wipe out my hard drive & reinstall everything & I really want to get this program back on there. Help!! ...

I have installed it and it works just fine until the point of creating invoice and it will not add up my words, lines, or anything. I have selected different ways just playing around and cannot get it to calculate. It produces the invoice just fine but with no actual calculations. The only thing I am wondering is if it is a Vista compatibility issue. I noticed the website did not list it under "Platform Supported". Thanks in advance for any help provided! ...

I find it ironic that ad after ad on the job boards here and others on those pathetic Indian websites that go on and on about wanting only the best, blah, blah, and 98% accuracy, when their are typos throughout their ads, and we pay beggar wages to boot! ...

I've made lots of 100% accuracy scores, but I just saw that I made a 3.0 Critical error on a VR dictation at Nuance. It was where the doctor said a medication amt that sounded very much like another amount. I have been extremely careful with the medication amounts and the laboratory values, but made this mistake!! Anyway, that brought my accuracy to just under 99%. I want to go back and listen to that dictation again, bet it was hard to tell the difference in t ...

I just heard that Mmodal is requiring 99.6? Just blinked my eyes a couple times. This can't be true, right? ...

With Nuance's high standards and QA picking apart every report, I am feeling pretty down on myself. I question my ability to do my job. I question every comma, every word, and dread waking up to this job for fear of making mistakes. It isn't a good feeling. I have been in this field since 1992 and have never felt so incompetent and stupid. ...

99.7% accuracy when told to a recent business school graduate. Sure 99.7% accuracy is what they strive for in production of goods in a factory..To try for 99.7% accuracy in a job that has as many variables as transcription is a completely unrealistic goal. Speech patterns alone of different people makes errors almost inevitable. What they are striving for is an impossible goal. Hum, wonder who is running the company because this is from a 22 year old ...

Any report that is 100%, give a 2 cent per line bonus for that report, you would be surprised what a little bit of positive reinforcement does. ...

We've all seen the blogs lately. Failing audits for not putting a comma, getting marked off for adding or deleting a word to make the sentence make better sense, not following CP and so forth. Here's something for MM to ponder (if they were actually reading all this). If accuracy truly means something to you, and that is one of your "selling points" to your clients (their website boasts "industry leading accuracy rate"), then why don't you give your MTs a chance ...

I just cannot wrap my head around why I continually get 100% accuracy and still get the shaft. This last week?.....I'm over QA by 0.23%, yet I repeatedly get 100% accuracy time and time again. I so need to change jobs, but I just cannot figure out which way to go…not to mention since taking pay cut after pay cut for the last 10 years, I cannot afford to go back to school, and I wouldn't know what to go for anyway…when I got into this field, I thought it was a sure thing, ...

if the 99% accuracy rate also applies to the ILP? After all, CBay and Medquist have become one company called Medquist (something, it has changed too many times for me to remember), but I would think if it is company policy it should apply to all. Most of us have an average of 99% or above accuracy rate, but I still have a problem with making it the standard rating. Especially given the consistent inaccuracy or ASR and the increase of lines per hour for many MTs. If this ...

Are they kidding? Who has 99.5% accuracy every audit. This is the new Mmodal accuracy rule. Sounds like they are trying to weed out that is for sure. You would have to be a robot to get this accuracy every single time you transcribe. ...

Very shortly our accuracy requirement will be 99.6%. Since this company cares nothing about accuracy, my conclusion is two-fold: 1) As they always have, they are going to use this as a marketing tool. 2) Anyone who falls below 99.6% will have their pay docked thus reducing the company's labor costs even further and will probably result in administrative bonuses. For new employees - welcome to MM. For everyone else - get out if you can. ...

I started at Nuance about a month ago. I am a new MT, graduated from CareerStep with Honors at 94%. I've been transcribing for 2.5 weeks now. I have quite a bit of anxiety because my QC scores are not improving, sometimes even getting worse. I seem to have troubles with numbers in particular. I will listen through labs or vital signs again and again and I am sure that I am hearing 116, not 160. I am just beginning to feel hopeless, like I am not good enough. A goal of 99% seems so far when ...

I just checked the accuracy of one of our best ESL dictators after editing. He has 28% accuracy. Total words: 350. Total errors: 64 (words and punctuation). This was a full page of report. I wonder what the average accuracy is for your dictators? How low a figure will they settle for allowing in the patient records? ...

I was wondering if anyone would tell me their experiences with the accuracy requirements for Synernet, how many audits they've had, what you did to bring up your scores... Like that. I cannot for the life of me see what I am doing, yet for the past 9 months I've been audited and keep getting put on 3-5 day QA. I'm worried that this is the last time... I mean, I READ the feedback and take it all in, but there is no consistency to what they mark against me! Any info would be a ...

How in the world are you supposed to meet that? Do they pay more for that kind of perfection? 98.8 is only about half a typo. Seems like they want something for nothing. That was in the recent job ads on this board. ...

Hey y'all, Just wondering how you determine your accuracy on the job? I mean, is it that you are 98-100% accurate the first time you transcribe something or do you send your transcripts back and forth to an editing department and the final product determines your accuracy? I'm just trying to figure out exactly how everything in the MT biz works before I take the plunge in the next few months after I graduate. Any insight is greatly appreciated. ...

I had a conversation with my personal physician today. He was using a laptop throughout the course of my exam. I questioned him as to whether this was EMR. He stated that it was. His entire practice has converted to EMR in conjunction with front-end speech recognition. This is the part that knocked me off of my feet--he stated that the physicians in the practice consistently get 95% accuracy in the drafts that present on the screen for them to edit. Note: They are editing the ...

On recent mandatory training video, when talking about quality percentages etc., the speaker mentioned that on spot audits by clients out of every 100 lines audited, only 60 of lines (or 60%) must be error free? Did I interpret that correctly? ...

got a report from auditors with a several below 99.6% and they were still marked as passing. anyone else? ...

A friend of mine works at Nuance (formerly worked at Transcend, but of course Nuance is gobbling up every MTSO) and said they require 99% accuracy. And rather than an average, they run the accuracy on every single report so that even though, for example, 5 reports may be 100% accurate, if one is 98%, you're screwed. Since when did the industry standard go from 98% to 99%? Plus apparently you are marked down for blanks no matter what. Whenever I have worked in a "real" healthcare organizatio ...

This company is undoubtedly the most ruthless company I've ever worked for. Nothing is good enough, NOTHING! ...

After failing my audit with a 99.55%, was told I cannot fail another audit of less than 99.7% for the next 6 MONTHS!!! Is anyone that super-human? I'd like to see the bozo that came up with that ridiculous number try it! ...

One of the biggest complaints I have is when the doctor doesn't spell the patient's name. I mean I cannot know how to spell all foreign names nor can I tell if it is a male or female. Another one is when doctors do not spell carbon copy doctors' names nor sometimes even say where they are from. If they want those things to be accurate, then dictate it that way PLEASE. ...

Is it the norm to get dinged for leaving a blank when you supervisor is checking accuracy? I think this is kind of unfair because if you are not sure of something and trying to be careful, why would you get dinged? Also, do you have specific guidelines as to what is expected, such as what is considered slang, et cetera. We started getting audited but have no criteria. ...

the accuracy level but instead of taking responsibility for that, turns it around on the MTSO as being wrong for penalizing them for not meeting the company's accuracy expectations. You know what they expect and you know what the penalty is if you cannot meet that expectation. How is that wrong on the MTSO's part? You cannot control the actions of the MTSO, you can only control your own actions and if you cannot meet accuracy, how is that a problem of the MTSO? ...

FlashCount accuracy - Sam

The difference might be...SM - Old Anon

Similar Messages: