A community of 30,000 US Transcriptionist serving Medical Transcription Industry

to RAD MTs, what is your line count vs... - radMT

Posted: Sep 10, 2013

So far, I have calculated the "count score" on Fluency at the new rate of 0.08/.048 vs per report rate. I 'lost' on average $165-175 per pay period over the past 3 months by the line count. My report rates are currently 1.20/.072.

Anyone else? Please share.

Also, the 'count score' is our line count, right??

Fluency line rate - radMT2

[ In Reply To ..]
This is going to be a positive for me as I get lengthy rad reports and per report averages much less. I am assuming it is our line count.

RAD MTs line count versus report count - soapie12

[ In Reply To ..]
Yes, count score is the line count not a report count which is a separate column. About 3 months ago, an email was sent out that included a short little almost unnoticeable line about RAD MTs getting credit for only 12 lines per report no matter what the true line count actually is. This was in the email telling us the line count requirement was raised for MED MTs. I have been keeping track since then and realized, if you do enough reports, the average line count is actually higher than 12 so feeling cheated already. So, I did the math. 12 lines per report, 12 reports per hour at $1.20 per straight type report is $0.10 per line and SR $0.72 per report is $0.06 per line. Now they are changing us to being paid by the line and actually reducing our pay per line from straight type $0.10 to $0.08 and SR $0.06 to $0.48 per line. Based on their Tiers, this is the equivalent of a demotion from a Tier III to Tier I. They claim they are trying to stay in keeping with industry standards yet, every job search I have done shows companies offering $0.09 straight type/$0.05 to $0.06 SR. Based on that Mwhatever is below the industry average/standard. Some, like me will benefit from this even with the pay cut as I have all my accounts with some very long-winded doctors/long reports and I continually get more lines than I do reports. Others may not be so lucky. So, I will count that one blessing and curse Mwhatever for the rest.

Similar Messages:

Feb 27, 2010

I usually use the line count built into the Word program itself. Is MTStars flash count and/or abacus equivocal ?? Any one program better than the other ?? TIA ...

Sep 20, 2013

x ...

Jun 15, 2012

to divide by 65 to get the number of lines??? Thanks. ...

Mar 24, 2011

I was just hired on with a company to do strictly VR. I am only going to be working part time so about 4 hours a day. I am wondering from those who do VR what kind of line production should I shoot for in 4 hours of work? What is the normal VR line count for part time? I have read that most who are working full time or 8 hours a day are doing more than 1,000, even 2,000 a day. The company I will be working for wants a minimum of 10,000 lines in a payperiod which the lady said even with part time ...

Apr 01, 2010

Anyone have MP Count? I used it a few years ago, but my computer crashed so I no longer have it. I'm not sure if this IC job is gonna work out so I'm not wanting to buy a program at this point. Any advice? Thanks. ...

Feb 23, 2011

Is this correct? I type 70,000 characters a day. I am paid by the 65 character line so I would divide 70,000 by 65 to get 1076, then multiple that by pay per line, say $.10 and get $107. If this is not correct then what is the formula? And what is the average number of lines per day? Thanks so much for the info. ...

Jun 25, 2012

I was wondering if anyone could tell me what is the easiest way to not count template lines when trying to invoice? I get a line count through Word, but I hear that Word counts blank spaces as well. I downloaded and use Flash Count, but it includes all 65 character lines, I beleive including the template headings. I hope this makes sense. Please help!! ...

Oct 24, 2011

I would like opinions about the IT (Instant Text) line count program? Do you find it user friendly? Are there other programs preferred/easier? Any suggestions or opinions? TIA. ...

Jan 07, 2010

Just did a job with a big standard. I have the line count, but do not know how to tell if I'm being credited with the lines in the standard. How can I calculate this? Thanks. ...

May 24, 2011

Hi. Can anyone decipher what the memo means about the new line count? How will our pay change, wait...never mind...I am sure it will go down. Anyway, what does this new stuff mean? ...

Jul 20, 2012

Has anyone else working in the North Region noticed that their line count has gone down since CCM made it so that only one job loads at a time? ...

Sep 19, 2012

I have been working for this company for about 18 month and so far so good. It was even bought out by a bigger company and everything stayed the same with no problems. They don't bother me, I do my work and everything is fine. About 6 months ago my line count started going way down and I really just chalked it up to not being able to concentrate as much because my baby started walking and basically making it impossible for me to work. For the past week my line count has about doubled. ...

Nov 13, 2012

Over an hour into my shift, I went to check my line count, so that I can keep track hourly.. well it has ZERO... nothing has taken effect yet??? is this normal. ...

May 04, 2013

I have been told that I need to increase my LPH. So last night I kept track of the lines of each document done by using MS Word. But later when I compared it to Nuance's line tracker (ichart) it only listed half the lines that MS Word listed. How can this be? I realized that Word my count blank lines, but how can there possibly be that much difference? I felt like I really kicked butt last night, but then to look at LPH with Nuance's ichart I felt cheated/ ...

Aug 10, 2013

Does anyone feel like they doing more jobs for less lines? ...

Nov 14, 2013

Anyone else struggling to get their lines in at AP after loosing a hospital recently? Maybe I'm signing on at the wrong time of day but usually there are hardly any jobs for at least an hour after I start the day. Hope I'm not alone or I am doing something very wrong. ...

Oct 13, 2009

"So if the company wants to consistently give me a slightly higher line count than I am able to document at my end, I should have a problem with this... why??" Wow. Crankybeach. You are old enough that you should not need to ask that question. Here are a few of the more publicized examples of "why": Exhibit A: Enron. Lots of people played along and look at the end result.Exhibit B: Madoff. Lots of people played along and look at the end result.Exhibit ...

Oct 21, 2009

I used to do 250-275 lph fairly easily. Lately, I am typing as fast and furious as ever and struggle to get above 200 lph. Not sure what is going on, but I'm pretty sure it ain't me. Also, when did they change the dictating system over to 2 cans and a piece of string? I CANNOT hear this CRAP. Even the American guys are starting to sound wind-tunnelish ...

Dec 04, 2009

Is it typical to only receive a percentage of your edited lines because "editing is faster and better" than straight transcription? I am new to VR, but this seems odd to me. No wonder I am being paid a decent rate. LOL So, when I edit a 50-line report, I only receive 60% of that report. I'm just curious if this across the board with all companies?? ...

Jan 26, 2010

I'm just starting ASR and was wondering if some of you could give me an average line count on ASR. Thanks. ...

Mar 18, 2010

What in the heck does .05 for every 43 black characters equal out to. It doesn't sound good but I'm no math whiz. Maybe, I'm missing something and who pays like that. What happened to X-amount of cpl based on a 65-character line..or even a gross line. I suspect it's a sneaky way to screw you but I could be wrong. ...

Apr 25, 2010

I was checking my line count, went back and checked it later, and it was down! Not the first time I have seen this. Seriously, I am feeling like we are being set up to fail in a MAJOR way! Issues with the line count, QA getting tougher, it is all adding up to on big set up-at least, that is the way it has been feeling to me lately. It is hard to stay focused when you feel like your work may disappear at any moment, or get in trouble with QA because of horrendous dictation ...

Apr 28, 2010

Can anyone tell me what their average line count is per day? (just the total not separated between work type). Im not trying to be nosey and I don't know who any of you are personally, I'm just trying to get an idea where I stand compared to everyone else here. I have been at Medquist for many years and seen many changes. Over the years, my line count has gone up and my pay has gone down. I am trying to determine if the reason is mostly me or mostly medquist changes and if th ...

May 24, 2010

Why is 5/24/2010 showing up twice on my monthly totals and when I run detail on this it is showing less jobs? Called tech support and they dont know. I'm sure I'm going to get ripped off of lines. I did take a picture of my computer screen showing this error so if my paycheck is wrong I have evidence. Is this happening to anyone else? ...

Jul 22, 2010

Has anyone noticed anything fishy about their line count? Mine do not seem to be adding up. ...

Jan 03, 2011

I am new to MedQuist. Can anyone tell me if you are supposed to see your line count on your paycheck stub? I don't see mine and that seems odd to me. ...

Jan 06, 2011

Below is a response when asked to clarify compensation from a prospective employer. As an "old school" MT, I am unsure as to how to interpret this. I've always been paid by th hour. I need to make a decision. Thanks in advance - .09 to .o93 cpl per line for traditional typing and editing lines being 1.5 lines = 1 traditional line. The range depends upon your quarterly quality score. So many years experience should be way up there in quality, huge benefi ...

Jan 14, 2011

I really don't want to back calculate to check my line count. Again, no FTR. ...

Mar 11, 2011

I would like to know if there are any companies out there that do not require a line count per day or week. I have been away from transcription for a long time, almost five years, and I don't know if I could handle having to worry about that. I looked in the Archives, but the info in there is too overwhelming and confusing. Any suggestions? Thank you. ...

May 08, 2011

Has anyone noticed that the line count in DQM is not rounded off, has a decimal point. Is this something new, did not get an email about it? ...