A community of 30,000 US Transcriptionist serving Medical Transcription Industry


Shorted lines on check - anon


Posted: Jan 26, 2011

I just checked my new pay stub on UltiPro and I was short almost 1000 lines (990 to be exact).  I sent an e-mail to payroll but was wondering if anyone else has ever had this problem and what did you have to do to get paid?  TIA

lines - sm

[ In Reply To ..]
Have to check mine. Just wondering, could it be due to the new time zone thing. Check DEP to see if lines are on there for day before or day after payperiod that you are missing. Not sure, just wondering if that could be what caused that.

I hate what they have done with the time clock. - dnr

[ In Reply To ..]
Shesh. If they were once able to figure it out with EST and keeping my clock in and out times in my time zone, why can't they do it now???? Now I have, because of my shift, parts of my shift showing up on different days and now I have to figure out whether I did all my shift hours or if I am missing a half hour or so because I needed to clock out for something. Ah yes, the MQ IT model, if it works, break it.

I also work a shift that goes over into the next day - Stupid system

[ In Reply To ..]
It used to be the time from midnight to 2 a.m. would go onto the next day, but now 10 pm to 2 am goes on the next day. On the old system, I would get emails that said I did not work my required hours for the week. I work 8 hours a day, 5 days a week. It is not my fault the system puts the hours so that it appears on paper I did not work 40 hours for the week. I like the new system because now I do not have to worry about when the pay period begins and ends and don't have to adjust my time accordingly.

Even with the new system, the 10 pm to 2 am on Saturday was too confusing for my CCM, so I have had to change my hours on Saturday so that no time goes into Sunday.


Similar Messages:


I Cant Seem To Get In To Check My Lines.
Feb 18, 2015

nm ...


Scan Your ADP Statements Ladies. I Am Shorted A Couple Hundred.
Mar 25, 2010

I have a call in with a ticket open.  Grrr.  This statement shows a base rate as well as an MT rate. What is that all about?  I am paid per report with radiology and they show the number of jobs transcribed at the base rate instead of the MT rate, which is considerable lower!  WTF. ...


Escription - 250 Line Count Minimum - Median Lines Or Average Lines?
Dec 20, 2014

Does anybody know which column companies look at to decide if you are meeting the minimum 250 requirement in Escription? When I look at the metrics there are 2 columns...median lines per hour and average lines per hour. ...


Is It True That FOCUS, Only Counts Half Of Your Lines When Calculating VR Lines?
Jan 30, 2012

if you make 4 cents per line at 1000 lines a day, they really calculate it at 500 lines per day x 4 cents, making it really 2 cents per line for the full 1000.   I heard this, and I am really interested in knowing if it is true. ...


Told Nuance Was Overcharging For Lines, Now Lines Drastically Reduced
May 02, 2012

My main account was a good one, and the lines were very good, mostly ER work. I have been on this account for over a year and a half now. We recently received an e-mail stating that Nuance had discovered that the line count was charging incorrectly, as instituted by them, and they had been crediting us with MORE lines than we were actually doing and overcharging the client. Now get this, they informed us that they would not make US pay it back, for their mistake, but that our new lines would re ...


TransTech Lines - Required Hours But Are Short Lines?
Jun 10, 2011

What do you do when you have the required hours but are short lines? I got an email that I need to "make plans to have my shortage made up." The only problem is that I'm up to date with my hours for the pay period so far. The other problem is that I have plans Saturday night and Sunday (both being my scheduled time off) that don't include TransTech. It's getting harder and harder to defend this company when they can't hold up their end of the agreement and continually ...


TransTech Lines - How Many Lines Do You Average During The Day/week?
Jan 19, 2011

Just wondering if the TT MTs would like share ... how many lines do you average during the day/week?  I'm doing about 9,000 to 10,000 a week and wonder if I should be pushing myself more.  How much of your count is VR?  I do probably 15% traditional and 85% VR but that, of course, varies week to week.   ...


Custom Lines Versus Standard Lines
Jan 08, 2013

Which do you use - custom lines - 65 character lines with spaces or standard lines - seems like so much more for standard lines????   Cathy ...


Are MS Word Lines The Same As Medquist Lines?
Jan 18, 2011

I am having a discrepancy issue with lines....wondered if MS Word and Medquist use a different number of characters per line.  Thanks.... ...


TransTech Lines - How Many Lines Do You Average Per Day
Jul 13, 2011

How many lines do you average per day - VR and traditional?  I know it's been VERY slow lately, but when things are going well, how many lines do you normally get? I'm trying to figure out where the average numbers are.  For me, I do about 350 trad and about 1400 VR in 8 hours. Well, my timesheet says 8 hours, but my clock says that number MAY(!) be a little higher.  Again, these are numbers I pull when things are going well and I'm not waiting for work to download. I'v ...


Is It Check Rein, Check-rein, Or Checkrein Ligaments
Sep 19, 2011

NM ...


Last Check
Aug 17, 2011

I turned in my 2-week notice and working the last week of the notice.  When can I expect to get my last check as I am waiting on labels from the company to send back computer and cannot get CCM to answer as to if check will be held until computer is returned?  Is there anybody with this experience that can tell me how long to expect to wait for the check and to wait for the labels as I have nowhere else to turn for the answers?  Really need my check, but cannot get anyone to send ...


Hey Check This Out...
Sep 13, 2011

Moderator:  I hope you will leave this on. Look on the Company Board. Scroll down to: Journalist's deadline question on Webmedx and Nuance - sewhidbey A journalist is doing an article on the local hospital's decision to outsource their transcription to Webmedx. The journalist wants info from MT's. Good chance to talk about Q, too! Here's a link to the article: http://www.pnwlocalnews.com/whidbey/wnt/business/129555093.html ...


PT Check $100 Less Than FT
Oct 11, 2011

I'm no genuis, but I think I have to make some changes here.  My PT check for 20 hours was around 100 less than my FT 40 hour check.  I like my FT job, good accounts, great supervisors, but the lines just don't accumulate there like anywhere else I have ever worked.   Then I worry, what if the other company runs out of work or loses an account and I get laid off.  There is no security in this business anymore.  I guess, just don't burn your bridges b ...


Last Check..does Anyone Know?
Feb 13, 2013

Does anyone know how long it takes for Nuance to get your last check out to you? ...


Check This
Nov 08, 2013

Read ...


Can Someone Tell Me How We Check Our
Dec 13, 2013

line counts?   Is it in Fluency or in UltiPro, or something else?  Thanks for any help ...


No Check
Dec 27, 2014

Anybody else not have their checks deposited yesterday? I was going to pay bills this morning and my check is not there! ...


Check Out These Rates (4th One Down)
Jan 10, 2010

They're based in California: http:///www.chromolumeinc.comp/transcription/rates.html ...


BNP Or BMP? For Zestoretic Check.. Sm
Mar 15, 2010

She has dehydration, suspect medication induced.  Thanks! ...


Final Check
Jun 30, 2010

Do anybody know how your final check is sent by Keystrokes?  I had direct deposit and wondered if it would go that way or be mailed out. ...


Where Is Everyone This Morning? I Did Not Get My Check. Sm
May 10, 2010

Well, to the poster below in ESL garbage land, first let me say.  I too was in that same place 2 weeks ago.  An addition to my regular account, but it was all I was getting and NOT getting my OP notes at all.   The reports were not more than 20 lines usually, but I spent much, much time in trying to decipher and be FTR.  My CCM was very good about it, and told me it would be taken off and I would not have to do that account any longer.   Of course, I wish I had ...


Check Your Mailbox!
May 17, 2010

Ya just gotta love it! ...


It's So Nice To Not Have To Check That Box At The End
Sep 09, 2010

so many times i've cursed because i was at the end of my shift but i forgot to check the box and had to do another one ...


Check This Out, Very Scary
Nov 13, 2010

A doctor who cannot pronounce encephalomalacia! She fumbles around with it for a while and then says "oh well, I will just spell it" and did so like she was asking a question (did spell it correctly though). This is an English speaking dictator with an MD credential.  Must be a resident as she has a co-signer but, my God, she should be more familiar with terms by now you would think.  She also fumbles around with common medication names and mg instead of mcg for Synthroid. Fo ...


Background Check
Dec 21, 2010

Has anyone out there not pass the background test through medquist ...


Check Out Link Below
Feb 23, 2011

http://www.docstoc.com/docs/71069538/Management-Led-Buyout-of-MedQuist-Causes-Shareholder-Claim-Investigation-by-Goldfarb-Branham-Law-Firm-LLP they are trading stocks with each other??  ...


If You're Check Was Incorrect
May 23, 2011

and short by a small amount, say .10, would you notify your MTSO or just let it go?  This is my situation and it is such a small amount I feel silly saying anything, and haven't brought it to their attention.  I've got mixed feelings about it... the money is due to me, but it's such a small amount it doesn't seem worth pursuing.  However, every little bit adds up.  It happens occasionally by a couple cents here and there and normally I don't say anyth ...


Check On UltiPro
Dec 14, 2011

My check for this pay period isn't showing up today.  Is anyone else having this problem? ...


SPELL CHECK BOX
Jan 30, 2012

My spell check box is too small.  I cannot see the Ignore, change, etc. boxes.  Can anyone tell me how to enlarge the box so I can see all of the choices?  TIA ...